View Single Post
Old 02-25-2019, 08:15 PM
A Computer Guy A Computer Guy is online now
Registered User
A Computer Guy's PC Specs
Join Date: Jan 2019
Posts: 172
POST ID # = 995597
A Computer Guy Reputation: 10

Sounds like the motherboard is trying to train the memory. Even if it is not on the QVL list for your motherboard there is a chance it can still work.

With that board my first post attempt took a little while to train and post but after that it was ok.

First uninstall the EVO.
Then try starting with only 1 stick in slot A2 and try to get to post.
Then try with the other stick only in slot A2 and try to get to post.

Did any one or both of those attempts post successfully?

If so up the BIOS/UEFI to the latest 2.0 with AGESA to update using the working stick.
Reboot when complete and reset BIOS/UEFI to defaults, reboot again.

Fill both A2 and B2 for dual channel and try to post again.
If successfully posting in dual channel then enter BIOS/UEFI and set all memory settings to AUTO and reboot.
It will likely set you to DDR4-2133.
Then enter BIOS/UEFI again and bump up frequency 1 step then reboot, do this until you reach DDR4-3000 or it fails to post.
(it's possible you may only get to DDR4-2933 until post fails again)

Last edited by A Computer Guy; 02-25-2019 at 09:41 PM.
Reply With Quote