View Single Post
Old 07-17-2018, 09:03 AM
DevBiker's Avatar
DevBiker DevBiker is offline
DevBiker's PC Specs
Join Date: Feb 2017
Location: Republic of Texas
Posts: 7,523
POST ID # = 963890
DevBiker Reputation: 88

How do you have this installed?

The fan lead from the pump should be connected to CPU_FAN. The radiator fans should be connected to the cooler. CPU_FAN should be at 100%; this is how the pump gets its power. Anything less than 12V and the pump won't operate properly.

You mentioned that you put the CPU_FAN at 100% and the fans ran at 100%. So apparently you set it back. The pump won't operate properly that way.

IF the CPU_FAN is set to 100% AND the fans are connected to the pump header AND the fans are running at 100%, then that means that the coolant temperature is too high. Again, assuming correct installation and the fan lead from the pump is on the CPU_FAN header, what is the CPU_FAN speed in the BIOS?

You may also want to take a look at the Liquid Cooler FAQ linked in my signature.
Please click "Edit System Specs" and fill out your system info.

This comment is provided "as-is", without warranty of any kind, express or implied, including, but not limited to, the sanity or mental fitness of the author. The author is not a Corsair employee, does not represent Corsair, and no comment should be construed as an official statement from Corsair.

Reply With Quote