View Single Post
  #4  
Old 11-13-2007, 08:27 PM
DerekT's Avatar
DerekT DerekT is offline
Registered User
DerekT's PC Specs
 
Join Date: Jul 2005
Location: White Rock, British Columbia
Posts: 10,168
POST ID # = 317101
DerekT Reputation: 10
Default

Download memtest from www.memtest.org and extract the ISO image. Burn the ISO image to an CD-ROM disk.

Try these settings in your BIOS.

Quote:

AI Overclocking: Manual
CPU Ratio Control: Auto
FSB Frequency: 333
PCI-E Frequency: 100
DRAM Command Rate: 2T
DRAM Frequency: 1066
FSB Strap to Northbridge: 333
DRAM Timing Control: Manual
CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Precharge: 5
RAS# Activate to Precharge: 15
TWR: Auto
TRFC: Auto
TWTR: Auto
TRRD: Auto
TRTP: Auto
DRAM Static Read Control: Disabled

Transaction Booster: Auto
Clock Over-Charging Mode: Auto

CPU Spread Spectrum: Enabled
PCIE Spread Spectrum:Enabled

CPU Voltage: Auto
CPU Voltage Reference: Auto
CPU Voltage Damper: Enabled
CPU PLL Voltage: Auto
DRAM Voltage: 2.2v (For V1.xx) or 2.1v (for V2.xx)
FSB Termination Voltage: Auto
North Bridge Voltage: 1.4
North Bridge Voltage Reference: Auto
South Bridge Voltage: Auto
Transaction Booster: Auto
Advanced CPU Settings
CPU Ratio Control: Auto
C1E Suppport: Enabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Enabled
CPU TM Function: Disabled
Execute Disable Bit: Enabled
PECI: Disabled
Boot to the optical drive with the memtest disk and allow for two full passes.

Results?
Reply With Quote