View Single Post
  #15  
Old 04-17-2008, 01:45 PM
DerekT's Avatar
DerekT DerekT is offline
Registered User
DerekT's PC Specs
 
Join Date: Jul 2005
Location: White Rock, British Columbia
Posts: 10,168
POST ID # = 343361
DerekT Reputation: 10
Default

Download memtest from www.memtest.org and extract the ISO image. Burn the ISO image to an CD-ROM disk.

Enter your BIOS. On the main BIOS screen press Ctrl + F1. You will see the screen flicker. Next select the MB Intelligent Tweaker option. On that screen you will see many additional settings that were not there before.

Settings for the Twin2X4096

MIB Intelligent Tweaker (M.I.T.)
Robust Graphics Booster = Auto
CPU Clock Ratio = 9
CPU Host Clock Control = Enabled
CPU Host Frequency (Mhz) = 400Mhz
PCI Express Frequency = 100Mhz
C.I.A.2 = Disabled
Performance Enhance = Standard
System Memory Multiplier = 2
Hi Speed DRAM DLL Settings = Option 2
DRAM Timing Selectable = Manual
CAS Latency Time = 4
DRAM RAS# to CAS# Delay = 4
RAS# Precharge = 4
Precharge Delay (tRAS) = 12
ACT to ACT delay = Auto
Bank Write To READ Delay = Auto
Refresh to ACT Delay = 0
Read to Precharge Delay = Auto
System Voltage Control
DDR2 OverVoltage Control = +.3V
PCI-e OverVoltage Control = Normal
(G)MCH OverVoltage Control = +.01
CPU Voltage Control = Auto
These settings will give you 400 X 9 = 3.6Ghz.
Download CPU-z from Here .
Please post screenshots of your CPU-z CPU/Memory and SPD tabs.
Download OCCT Perestroika for a quick, hard and fast CPU stability test ---> Here
Download Real Temp from Here .
Boot to the optical drive with the Memtest disk and allow for two full passes. Please post a screenshot of your Real Temp values when using 1 hour OCCT.

Results?
Reply With Quote