View Single Post
  #5  
Old 11-26-2008, 04:19 AM
Synthohol's Avatar
Synthohol Synthohol is offline
LiquidNinja
Synthohol's PC Specs
 
Join Date: Jun 2006
Location: looking through your window
Posts: 5,330
POST ID # = 377707
Synthohol Synthohol Reputation: 103
Send a message via AIM to Synthohol Send a message via Yahoo to Synthohol
Default

just my .02
your CPU should be running at 2.7Ghz your multi is WAAAAYYY too low and the RAM should be running at 400 at least.
your rig is tremendously UNDERCLOCKED!!
this can be the issue as well.
i suggest resetting the bios and entering the RAM settings manually and hopefully the PC will run at stock speed at least.

i have the M2N32-SLI board and i know there are a billion settings to tinker with.

personally i would start there.
your bus speed should be 200 and your memory frequency should be at least at 400!!


good luck!!

13x200 is stock IIRC not 5! heres a screeny of a slight overclock but yours should be similar at 13x200
Attached Images
File Type: jpg cpuz.jpg (71.6 KB, 1595 views)
__________________
Thinking about combining 2 or more sets of ram?? even the same part# is not suggested, recommended or supported.

System Specs as of 6/17/10

Last edited by Wired; 11-26-2008 at 08:46 PM. Reason: cleaned up pic
Reply With Quote