View Single Post
Old 08-26-2004, 01:19 PM
RAM GUY's Avatar
RAM GUY RAM GUY is offline
Corsair Product Guru
Join Date: Apr 2001
Location: Fremont, CA
Posts: 118,268
POST ID # = 139963
RAM GUY Reputation: 10

First thing, please do not try to merge the issues you may see and look at the issue you have on it's own merits! You will find a solution a lot faster!

The MB you have is not dual channel and may not O.C. as well with 2 modules as it will with just one! In addition with 2 modules in this MB they should be in slots 1-3 and I would set the Dim Voltage to 2.8 Volts as well!
Also I would try these settings and see if the system is more stable:
CAS Latency CL=2.0
Row Cycle Time tRC Bios Default
Row Refresh Cyc Time tRFC Bios Default
Ras# to CAS# delay tRCD 3
Row to Row delay Bios Default
Min Ras# Active Time tRAS 11
Row Precharge Time tRP 2
Write Recovery Time Bios Default
Write to Read delay Bios Default
Read to Write Delay Bios Default
Refresh Period tREF Bios Default
Enable 2T Timing Disabled
Then test the system with and make sure it's stable! If you have problems, I would set Enable 2T Timings to AUTO and test it again!
Support accounts and tickets can be created at
Reply With Quote