View Single Post
  #2  
Old 03-22-2018, 01:35 AM
DevBiker's Avatar
DevBiker DevBiker is offline
iCue βeta Team Green
DevBiker's PC Specs
 
Join Date: Feb 2017
Location: Republic of Texas
Posts: 7,245
POST ID # = 945956
DevBiker Reputation: 88
Default

First, the H115i Pro cooler is SATA powered. So it doesn't get its power from the fan header; that's the issue that some folks refer to with the AIO_PUMP header. It does have a fan header that you'll want to plug in to the CPU_FAN header; this will provide a tach signal to the header so you don't get a CPU fan warning from the BIOS on boot.

The AIO headers on the Asus boards are really standard fan headers that are set to 100% by default. You can go into the BIOS and enable Q-Fan control for that header and use it just like any other fan header. Or you can use a splitter on the chassis fan header and power both fans from the single header. The only difference is in control; if you switch around the AIO header, you'll be able to control the fan speeds independently. If you use a splitter, both fans will be controlled together and run at the same speed.
__________________
Please click "Edit System Specs" and fill out your system info.

This comment is provided "as-is", without warranty of any kind, express or implied, including, but not limited to, the sanity or mental fitness of the author. The author is not a Corsair employee, does not represent Corsair, and no comment should be construed as an official statement from Corsair.

Reply With Quote