View Single Post
  #3  
Old 12-26-2014, 06:37 PM
The Veterant The Veterant is offline
Registered User
The Veterant's PC Specs
 
Join Date: Dec 2014
Location: PR
Posts: 3
POST ID # = 749193
The Veterant Reputation: 10
Default

Well sorry guys that I posted here, since I saw kind of similar issue with my motherboard Ram combo as well.

My first time posting here also so, here I go. In my experience I bought my first 5960X Cpu from Costa Rica and assume the memory controller wasn't strong enough do to I couldn't boot my computer with the XMP-1 nor XMP-2, then keep using the memory at stock but ones in while tweaking timming, then I decide to buy another 5960X from Malaysia, with this one I could boot with any XMP profile but sometime not stable. Frustration came up and went back to stock setting then kept looking for info and find out that on auto setting in my case I was not able to have the system stable and I notice in Aida64 the VCCSA at auto setting for 3000 were 1.267V and that was scary for me. Then I decide to do things manual, that's when I came across to test this kit part number version 5.29 at 2600Mhz with 1.210V at 100Mhz strap and an OC at 4.4Ghz and it runs solid snappy but some times at boot it hangs at bd q-code and I solved that rising the VCCSA, now is at 0.896 in Aida64 and bios. Also after setting this VCCSA the q-code finish at (AA) before was (A2) or (A0) and one more thing I notice that now at 100 strap the 4.4Ghz needs or reads in Aida64 while stress testing a 1.344V before at auto the CPU only need it 1.328 for the same OC but the VCCSA was in auto and in Aida64 was at 1.167V.

Now my question is: it is safe to run this ram at 100 strap at this speed(2600Mhz)? Have guys test this ram at 100 strap with this speeds, like 2600, 2666. 2800 and 3000 I know is not possible at 100 it has to be 125 strap but with the results that I get with 2600 in Aida64 mem test I'm more than happy. I get an average 62,000 all across. Thanks for any advice and help.
Reply With Quote