shoko Posted May 22, 2020 Share Posted May 22, 2020 hi everyone after i enable xmp my pc crashes in games idk i just enable the profile 1 from my bios and everything in auto should i change anything in bios to run the 3000mhz speed with out crashing ? my specs i5 8600 non k mb gigabyte z370 uhd ram corsair cmr16gx4m2c3000c15 2*8 gpu GTX1060 i update the bios to the last version but id dose not help thats my bios settings Link to comment Share on other sites More sharing options...
c-attack Posted May 23, 2020 Share Posted May 23, 2020 You may need to adjust VCCSA and VCCIO voltages as well. Those are usually back on the main setting page toward the bottom. This is one of the rare times more isn’t always better. It is likely on auto and I don’t know what the board provides for that. Most people will need around 1.15v for 3000 MHz. The other thing you can do is is bump the DRAM voltage slightly. Try 1.375. This will have an imperceptible effect on temps, but might stabilize things. Link to comment Share on other sites More sharing options...
KILLER_K Posted May 24, 2020 Share Posted May 24, 2020 Try giving it a tad move voltage on the ram voltage in the bios. Maybe 1.36 - 1.38v and see if that stables you out. Some boards don't give enough and some give too much voltage. Link to comment Share on other sites More sharing options...
Recommended Posts