View Single Post
Old 02-21-2018, 12:01 PM
edgare1 edgare1 is offline
Registered User
Join Date: Feb 2018
Posts: 1
POST ID # = 941647
edgare1 Reputation: 10
Exclamation My m.2 ssd will not boot windows and is not in readable in bios.

I have recently built a computer and got the whole pc running without any problems. I was able to install windows on the mp500. The drive itself was working properly no issues that I could see. After getting all the programs I needed on it I went ahead and turned off the pc to install a mass storage hdd. The hdd didnt show up in windows so i decided to restart the pc once more. After that second restart windows would not start from the mp500. I disconnect any storage other than the mp500 and still could not get it to boot to windows. The drive is also not showing up in the bios. The windows repair tool says there is not readable drive. My ssd is not being read and I would like some assistance on the matter if possible. Thank you in advance for any assistance you may give me.

Not my pc its a pc I built for a friend so I will leave the specs down here:

MOBO: Gigabyte Z270P-D3

CPU: Intel Core i5 7500

GPU: EVGA GeForce GTX 1060 6GB GAMING (Single Fan)

OS BOOT DRIVE: Corsair Force MP500

Storage: Seagate 2TB BarraCuda SATA

RAM: 8GB Ballistix Sport DDR4 2400 MHz (2 are in the system) I lent her an extra RAM stick that is the same exact model I bought the same time she bought hers.

PSU: Thermaltake Smart 600W 80+ White

OS: Windows 10 Home

Thanks again for any help ^_^
Reply With Quote