akynxs Posted September 23, 2019 Share Posted September 23, 2019 (edited) https://i.imgur.com/W49wtFy.jpg [iCUESetup_3.20.80_release.msi] Extremely High CPU Consumption The program is open in the Windows task manager but does not open the screen. Already removed with Revo Unistaller I already removed the drivers I already formatted the computer I do not use antivirus I used a firewall, even turning it off or on makes no difference The [iCUESetup_3.19.120_release.msi] version also has the same problem. Version [iCUESetup_3.18.77_release.msi] is working normally. Edited September 25, 2019 by Technobeard Changed to link Link to comment Share on other sites More sharing options...
makaveli6103 Posted September 24, 2019 Share Posted September 24, 2019 (edited) I still am having issues with the update. Previously 3.18.77 was only using 1-2% CPU. Avoided 3.19.120 due to the documented issues. 3.20.80 is using 8-15% cpu consistently. Loos like I will be downgrading back to 3.18 Edited September 24, 2019 by makaveli6103 Link to comment Share on other sites More sharing options...
Blackworms Posted September 24, 2019 Share Posted September 24, 2019 (edited) I am having problems as well. 3.18 was using 1-2% like above user told, and now it's more than 3-5% all the time. Additionally and I think more importantly, when you enable full software RGB control for Corsair Vengeance Pro RGB, CPU usage spikes to 20-30% and stays like that all the time. Disable and now it is again 3-5%. Does anyone have the same problem? Edited September 24, 2019 by Blackworms Link to comment Share on other sites More sharing options...
BlaiseP Posted September 24, 2019 Share Posted September 24, 2019 (edited) I am having problems as well. 3.18 was using 1-2% like above user told, and now it's more than 3-5% all the time. Additionally and I think more importantly, when you enable full software RGB control for Corsair Vengeance Pro RGB, CPU usage spikes to 20-30% and stays like that all the time. Disable and now it is again 3-5%. Does anyone have the same problem? Did you read James' post? The only CPU issue we see is when DRAM has software lighting enabled. This does cause the CPU usage to increase. To resolve this, we've done two things: 1.) We deployed a new driver to control DRAM lighting in iCUE v3.19. This will pave the way to manage the lighting on the modules to be much more efficient. 2.) We are currently working on a new firmware for Vengeance RGB PRO and Dominator RGB to take advantage of this new driver. Once we are ready to deploy, we should be able to significantly reduce the CPU overhead. In the meantime, if users feel their CPU usage is too high (avg 10-20% depending on CPU), then we recommend to disable software control for DRAM until our new driver is ready. Edited September 25, 2019 by BlaiseP Link to comment Share on other sites More sharing options...
Enigma776 Posted September 25, 2019 Share Posted September 25, 2019 This version is still broken, it don't even load just sits in the task manager no icon in the system tray either and eating 30% cpu. Link to comment Share on other sites More sharing options...
dobrMAN Posted September 25, 2019 Share Posted September 25, 2019 This version is still broken, it don't even load just sits in the task manager no icon in the system tray either and eating 30% cpu. [iCUESetup_3.20.80_release.msi] Extremely High CPU Consumption The program is open in the Windows task manager but does not open the screen. Already removed with Revo Unistaller I already removed the drivers I already formatted the computer I do not use antivirus I used a firewall, even turning it off or on makes no difference The [iCUESetup_3.19.120_release.msi] version also has the same problem. Version [iCUESetup_3.18.77_release.msi] is working normally. I have same issue! Link to comment Share on other sites More sharing options...
Panto Posted September 25, 2019 Share Posted September 25, 2019 Hi, I own for now, k95 platinum and a Polaris mousepad, soon there will come a Void Headset, a St100 and a Nightsword RGB. I have problems because since version 3.19 ICUE does not start with the operating system anymore. I tried to downgrade to 3.18 but then all my profiles disappear. As for CPU utilization issues with simpler profiles and minimized ICUE I believe you use at most 5% cpu, but I realize that the more complex the profile the more CPU uses. Link to comment Share on other sites More sharing options...
cplifj Posted September 25, 2019 Share Posted September 25, 2019 Are we sure every windows file is intact? Maybe check that first with the windows DISM cmd ? Link to comment Share on other sites More sharing options...
BlaiseP Posted September 25, 2019 Share Posted September 25, 2019 Are we sure every windows file is intact? Maybe check that first with the windows DISM cmd ? And it would help if people didn't just sprout "it don't work!" without any indication of what exactly doesn't work, their hardware or even what Corsair devices are in question. Link to comment Share on other sites More sharing options...
npark Posted September 26, 2019 Share Posted September 26, 2019 My void pro stopped working right after i updated the icue to v3.20.80. the mic is working properly but there is no sound coming. ive tried wired and that doesnt work. it is my default i tried testing the headset is control panel but just got failed to play test tone. Link to comment Share on other sites More sharing options...
Kompura Posted September 26, 2019 Share Posted September 26, 2019 Both 3.19 and 3.20 conflicts with Battlefield V causing it to crash very often. Link to comment Share on other sites More sharing options...
shane3621 Posted September 27, 2019 Share Posted September 27, 2019 I updated, and now my h100i platinum wont show up in the devices....any idea how to fix this? Link to comment Share on other sites More sharing options...
Falcon2045 Posted September 27, 2019 Share Posted September 27, 2019 My void pro stopped working right after i updated the icue to v3.20.80. the mic is working properly but there is no sound coming. ive tried wired and that doesnt work. it is my default i tried testing the headset is control panel but just got failed to play test tone. Go to Device Manager, Select your Void Pro under Audio Video and Gamecontrollers, Right Click, Update Drivers, Drivers on this Computer, Select from list of available drivers, Select the Corsair driver and let it install. Should work again, then. Link to comment Share on other sites More sharing options...
shane3621 Posted September 27, 2019 Share Posted September 27, 2019 is there any way to roll back updates, so I can get control of my water cooling again? this is crazy... Link to comment Share on other sites More sharing options...
xin0710 Posted September 27, 2019 Share Posted September 27, 2019 * Releases new build, has no patch noes. * New build brakes allot of peoples systems to the point they return hardware / reinstall windows. * Ignores everyone's feedback * Refuses to pull the update that is causing people hell. * Another new build comes out, cba to even make its own patch notes. * Totally ignores the HUGE issues people had/downplays them as "minor". Business as usual heh? End of the month gotta stay on that release scheduled even if the last update was broken. Please fire whoever is in charge of the software team and get some competent person in there place. This is quite disappointing. I can no longer recommend Corsair peripherals to anyone if it means they are forced to experiment with software that causes performance issues. Anyone who plays any competitive game should probably avoid using iCUE and peripherals that need it to function as intended. Now I feel bad for those professional eSport teams with Corsair sponsorships. Link to comment Share on other sites More sharing options...
Panto Posted September 28, 2019 Share Posted September 28, 2019 Now my icue freeze some times, my k95keyborad also frozen lights and the mic of void pro wireless say the microfone is off-on dozen times and stop working too. The ICUE was working fine until 3.18. Now its a mess....i need restar desktop to start work properly...and ICUE still do not iniciate with windows even if i marked to do. Link to comment Share on other sites More sharing options...
Raimo5 Posted September 28, 2019 Share Posted September 28, 2019 Great, the issues persist. I wont even bother to describe anything because whatever third world software developer Corsair employs wont acknowledge the issues. Glad I didn't go ahead with Hydro X build. Will find something more reliable. Link to comment Share on other sites More sharing options...
A Computer Guy Posted September 29, 2019 Share Posted September 29, 2019 I updated from 3.18 to 3.20 and it went smoothly for the most part. The exception was I tried checking and applying firmware updates for my other devices and my Strafe RGB MK.2 would crash when attempting to update firmware for the keyboard. When using "clear onboard storage" the keyboard would drop out of iCue requiring you to quit and restart iCue. Eventually I recovered the keyboard and was able to update the firmware successfully after unplugging and re-plugging in the keyboard and restarting iCue several times. The major symptom if it was going to fail seems to be current layout and current firmware version are not reporting properly. Once those reported properly in iCue the firmware update completed successfully. After the firmware applied on the keyboard it was working as usual as I can tell so far. iCue and the Corsair service still seem to keep the CPU busier than one would like. I suspect if they can switch over to a native 64-bit service and native 64-bit app that would probably help a lot to making those programs more optimal for the CPU. Link to comment Share on other sites More sharing options...
batsilos Posted September 29, 2019 Share Posted September 29, 2019 Corsair K70 RGB lux does not display the polling rate in settings with this version. Link to comment Share on other sites More sharing options...
BradB111 Posted September 29, 2019 Share Posted September 29, 2019 Please can this be considered? Especially given you have a recent product release that can benefit from this feature also: https://forum.corsair.com/v3/showthread.php?t=189791 Link to comment Share on other sites More sharing options...
boxanata Posted September 29, 2019 Share Posted September 29, 2019 (edited) K95 RGB After updating to v3.20.80, whenever I press my TAB key It scrolls to the right. I can't Alt+Tab in-game as it's like the tab key has been rebound to right arrow. WTF? Edit: Okay, after reinstalling iCUE & doing a system restore the issue still persists, so I'm guessing it can't be iCUE. Either it's a coincidence that it started happening after the update, or I just haven't noticed until now. I'm stumped. Edited September 29, 2019 by boxanata Link to comment Share on other sites More sharing options...
demonking Posted September 30, 2019 Share Posted September 30, 2019 Now i'm unable to import profiles, everytime i do the app crashes -_- Link to comment Share on other sites More sharing options...
Grid21 Posted September 30, 2019 Share Posted September 30, 2019 I am having a major issue. I just updated to 3.20.80 and now my Corsair K95 Platinum is saying "Current Layout: Not available". I have tried doing a system restore which reverted iCue to 3.19.120 which completely didn't detect my corsair gear at all, then when I updated back to the newest version, it detected my corsair gear, including the keyboard, now it still says "Current Layout: Not available". Someone, please help me. Thank you. Link to comment Share on other sites More sharing options...
BlaiseP Posted September 30, 2019 Share Posted September 30, 2019 Try plugging it into different USB port to get it re-enumerate devices within the software. Link to comment Share on other sites More sharing options...
imdoon Posted September 30, 2019 Share Posted September 30, 2019 Made an account because this patch broke my macros. Gave me a little indicator saying the macros weren't functioning correctly and to try repairing. Repairing did nothing so I tried rolling back to a different patch. Then from the software I went to update to this patch and it seemingly works again. Annoying that you guys launch software this buggy this consistently, just glad I keep every update you do because I anticipate you breaking everything again. Tell your devs to get their act together and stop shipping broken software. Link to comment Share on other sites More sharing options...
Recommended Posts