View Single Post
Old 12-28-2018, 01:30 AM
DevBiker's Avatar
DevBiker DevBiker is offline
DevBiker's PC Specs
Join Date: Feb 2017
Location: Republic of Texas
Posts: 7,865
POST ID # = 987301
DevBiker Reputation: 88

Originally Posted by CTOverton View Post
Don't know if you are still on this subject four years later but I was wondering if you have any idea if this could work with the Corsair Lighting-Node-PRO? This being becuase you said the LED strips standards are



The NZXT LEDs that come with the H700i case are four pin, but the Lighting Node Pro is only a three pin.

As well however, the LL120mm and LL140MM come with the "RGB Lighting Hub" to connect the fan LEDs and these are 4pin.

So... could you connect to either or these and how so?
You seem to be skipping over the most recent discussion.
First, your "standard" is Analog RGB. Forget that. Corsair uses 5V Addressable RGB. Completely different protocol.

The 4 pins for the fan allow them to have a Data Out (to fan) and a Data In (from fan). This allows the fans to be daisy-chained (via the RGB Fan Hub) while still providing fully addressable LEDs.

As for the NZXT fans ... no idea. I've never seen them or their connectors.
Please click "Edit System Specs" and fill out your system info.

This comment is provided "as-is", without warranty of any kind, express or implied, including, but not limited to, the sanity or mental fitness of the author. The author is not a Corsair employee, does not represent Corsair, and no comment should be construed as an official statement from Corsair.

Helpful Links and FAQs:
HydroX FAQ | RGB Cables |
iCUE Tips & Tricks

Reply With Quote