View Single Post
  #19  
Old 09-19-2004, 09:56 AM
nicoletti nicoletti is offline
Registered User
 
Join Date: Sep 2004
Posts: 26
POST ID # = 144204
nicoletti Reputation: 10
Default cass 2T-3-3-6 at 2.7 V

I changed the SDRAM CAS Latency to 2T (before it was 2.5T)
and the Graphics Aperture size to 128MB (before it was 64MB)

The others settings is the same as before :

CPU Freq.: 200Mhz
CPU Multiplier: 11x (Menu, not Auto)
System Performance: User Defined
Memory Freq.: 100%
Memory Timings: User Defined
Precharge: 6
RAS-CAS: 3
RAS Precharge: 3
CAS Latency: 2T
FSB Spread Spectrum: Disabled
AGP Spread Spectrum: Disabled
CPU Vcore: 1.65V
Graphics Aperture: 128MB
DDR Voltage: 2.7V
AGP Voltage: 1.5V
AGP 8X Support Enabled
AGP Fast Write Enabled

And the errors on test # 5 (memtest86+) disappeared!
but test # 6 reports now 15 errors .

I hope that this information could help you finding a solution for this problem.

Regards,

Luciano
Reply With Quote