The Corsair User Forums  

Go Back   The Corsair User Forums > Search Forums

Showing results 1 to 25 of 57
Search took 0 seconds.
Search: Posts Made By: zsde
Forum: Memory 04-29-2019, 05:17 AM
Replies: 14
Views: 9,286
Posted By zsde
With 4 modules you may have to increase your...

With 4 modules you may have to increase your memory voltage to compensate for the additional load. Try with 1.35V and then test with your 4 modules by gradually going up to 2400-2666-2800 and so on...
Forum: Power Supplies 09-26-2013, 02:19 PM
Replies: 12
Views: 5,819
Posted By zsde
Only if you have too much money.

Only if you have too much money.
Forum: Memory 12-08-2012, 01:14 AM
Replies: 29
Views: 9,491
Posted By zsde
That would not be an upgrade. Even if you get...

That would not be an upgrade. Even if you get your memory to run at those speeds, your overall performance will be less with a Z77. You are chasing a theoretical number that may show minor...
Forum: Memory 11-14-2012, 03:49 PM
Replies: 8
Views: 3,239
Posted By zsde
Which supports the JEDEC standard for DDR3 of...

Which supports the JEDEC standard for DDR3 of 1,5V + or - 5%, exluding the LV RAM which HU16E already mentioned.
Forum: Memory 11-11-2012, 03:41 PM
Replies: 4
Views: 2,673
Posted By zsde
Lets leave the BS comments. I had a 2600K on my...

Lets leave the BS comments. I had a 2600K on my Z77 board and the options were 1866 or 2133. Once I added the 3770K, 2000 became an option as well, so the answer is that you can run them at their OC...
Forum: Memory 11-10-2012, 06:43 AM
Replies: 4
Views: 2,673
Posted By zsde
2000 is only available once an Ivy support BIOS...

2000 is only available once an Ivy support BIOS has been flashed. Even then I don't believe that 2000 becomes an option with a Sandy Processor. Having said that, its not advisable to flash to an Ivy...
Forum: Memory 11-02-2012, 02:15 PM
Replies: 22
Views: 6,699
Posted By zsde
Your CPU contains the IMC Integrated Memory...

Your CPU contains the IMC Integrated Memory Controller. This natively supports 1600 if its Ivy and 1333 if its Sandy. Higher mem frequencies are overclocking which is never guaranteed. You need to...
Forum: Power Supplies 11-02-2012, 12:32 PM
Replies: 5
Views: 2,294
Posted By zsde
Your first point of contact should be the...

Your first point of contact should be the reseller/dealer that you bought the product from. They need to explain why they supplied you with a previously opened and potentially used product.
Forum: Power Supplies 10-29-2012, 11:35 AM
Replies: 2
Views: 2,271
Posted By zsde
The tolerances vor PSUs on the 12V rail are ...

The tolerances vor PSUs on the 12V rail are
+12VDC ± 5% min +11.400 VDC and the max+12.600 VDC
If we have to believe CPUID then you are near the lower limit, but that software may not be...
Forum: Power Supplies 10-29-2012, 11:27 AM
Replies: 2
Views: 1,704
Posted By zsde
Does your board have onboard graphics ? If so,...

Does your board have onboard graphics ? If so, disconnect your discrete card and the retest with onboard graphics only to see if it behaves the same. That way at least you may be able to determine if...
Forum: Power Supplies 10-29-2012, 11:20 AM
Replies: 24
Views: 6,433
Posted By zsde
Here is my personal experience. I have had a...

Here is my personal experience.
I have had a TX650 for around 2 years. Not the V2, the original. That one, I realised only lately, once I was using it in a test bench, that it has a high pitched...
Forum: Memory 10-25-2012, 01:22 AM
Replies: 10
Views: 11,182
Posted By zsde
Ram Guy, could you link me to the Intel technical...

Ram Guy, could you link me to the Intel technical documentation that contains this information, for my own future reference.
Forum: Memory 10-24-2012, 02:19 PM
Replies: 22
Views: 7,516
Posted By zsde
As peanutz already mentioned, your actual RAM...

As peanutz already mentioned, your actual RAM voltage may be quite a bit below the 1,5V. Unless you can measure it with a DMM, you will never know. I know from two of my boards that the real voltage...
Forum: Memory 10-24-2012, 12:04 PM
Replies: 4
Views: 1,941
Posted By zsde
Please post ascreenshot for both the timings that...

Please post ascreenshot for both the timings that you are talking about.
Forum: Memory 10-22-2012, 12:53 AM
Replies: 17
Views: 6,822
Posted By zsde
Well, at least you have established that the temp...

Well, at least you have established that the temp readings are pretty much the same across different apps and thus they are pretty accurate. Yes, a better cooler would assist in getting them down....
Forum: Memory 10-21-2012, 01:31 PM
Replies: 3
Views: 5,932
Posted By zsde
See this thread...

See this thread http://forum.corsair.com/forums/showthread.php?t=111415
Forum: Memory 10-20-2012, 11:13 AM
Replies: 17
Views: 6,822
Posted By zsde
Seen that before. Different temps reported by...

Seen that before. Different temps reported by different SW applets. One tends to trust the MB manufacturers SW , but I have seen those to be incorrectly labelled or extracting the info from the wrong...
Forum: Memory 10-20-2012, 07:47 AM
Replies: 19
Views: 7,652
Posted By zsde
No, XMP is independent of turbo boost

No, XMP is independent of turbo boost
Forum: Memory 10-20-2012, 04:22 AM
Replies: 17
Views: 6,822
Posted By zsde
I am not saying the Intel fan is terrible, its...

I am not saying the Intel fan is terrible, its just an adequate fan. Your screenshot was taken in idle ? Thefan will be at a lower RPM in idle. You need to put your system under load and see if the...
Forum: Memory 10-20-2012, 04:17 AM
Replies: 19
Views: 7,652
Posted By zsde
Those numbers look about right with that CPU...

Those numbers look about right with that CPU frequency. Can you post your CPU-Z SPD and memory tabs.
Forum: Memory 10-19-2012, 01:07 PM
Replies: 17
Views: 6,822
Posted By zsde
What do you use to read the CPU temp ? HW monitor...

What do you use to read the CPU temp ? HW monitor allows you to check CPU and the core temps independently. Check that.
What cooler are you using ? 80C is not inconceivable with the stock Intel fan.
Forum: Memory 10-19-2012, 12:50 PM
Replies: 19
Views: 7,652
Posted By zsde
The QVL list provides confirmation of tested...

The QVL list provides confirmation of tested memory. Asus cannot test every memory module that is available. This does not mean that other modules won't work. Yours works at 1600, that you know...
Forum: Memory 10-19-2012, 12:37 PM
Replies: 19
Views: 7,652
Posted By zsde
Your integrated memory controller natively only...

Your integrated memory controller natively only supports DDR3-1600. Overclock above that is not guaranteed. Being a B75 chipset board, I have my reservations about overclocking capablities, as it is...
Forum: Power Supplies 10-03-2012, 12:32 PM
Replies: 3
Views: 1,962
Posted By zsde
What makes you think its dying. Any indications...

What makes you think its dying. Any indications that point to your PSU being defective ? If you are considering a PSU upgrade then a TX650 would be my recommendation, but that is because I have had...
Forum: Memory 10-02-2012, 02:51 PM
Replies: 7
Views: 3,893
Posted By zsde
Perhaps you should manually set it to 1600 first...

Perhaps you should manually set it to 1600 first and test if thats working. If it is, settle for that until Intel provides feedback. Whether they will entertain your 1866 endeavours remains to be...
Showing results 1 to 25 of 57

 
Forum Jump

All times are GMT -4. The time now is 11:55 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.