sunseraphic Posted October 9, 2017 Share Posted October 9, 2017 I just found it is very embarrassing that the SSD Drive Caddy of 600Q (http://www.corsair.com/en-us/carbide-600q-c-ssd-drive-caddy-x3#) has no enough space to insert a Intel 750 2.5" SSD. The Intel 750 2.5" SSD is of 15mm height, while the SSD Drive Caddy is too narrow to put it in. I wanna know if somebody or maybe Corsair officially has a solution for this issue. Thank you very much. Best Regards Link to comment Share on other sites More sharing options...
Toasted Posted October 12, 2017 Share Posted October 12, 2017 Unless you can find a way to modify the caddy to fit the drive, you will likely need to mount the drive else where. Link to comment Share on other sites More sharing options...
Corsair Employee Greybeard Posted October 13, 2017 Corsair Employee Share Posted October 13, 2017 If you are not using the optical bay, you can probably mount the ssd there using an 2.5 to 3.5 adapter, that's an alternative. Link to comment Share on other sites More sharing options...
sunseraphic Posted October 17, 2017 Author Share Posted October 17, 2017 Thanks for your comments. Since I have a Blu-ray RW drive and there is no such a better place to install the disks. I had a dremel from Amazon to modify the candies to fit the SSDs. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.