The Corsair User Forums

The Corsair User Forums (https://forum.corsair.com/forums/index.php)
-   Hydro X Custom Cooling (https://forum.corsair.com/forums/forumdisplay.php?f=303)
-   -   fluid- compatibilty list? (https://forum.corsair.com/forums/showthread.php?t=189981)

knacker40 09-02-2019 07:39 AM

fluid- compatibilty list?
 
Having had the same issues with some Thermaltake clear fluid as in the XSPC thread, is there a list of fluids- apart from Corsair stuff:D:- that either can be recommended or more importantly avoided.
Just going through second flush of deionised water in this loop so fingers crossed it will clear after a few more

Corsair GregX 09-02-2019 08:07 AM

Could you let us know the exact model of Thermaltake clear fluid?

Coolant compatibility list can be found under related Hydro X parts, under compatibility tab.

Based on your issue with XSPC EC6 coolant, we will monitor and take further actions to validate its position on the list.

knacker40 09-02-2019 08:08 AM

it's the C1000 Pure clear- which is on the list

Corsair GregX 09-02-2019 08:11 AM

Thank you for info.

I would recommend to get distilled water for further flushing procedures.

knacker40 09-02-2019 08:17 AM

I cant get distilled where I am without it costing as much as the loop itself

Zone55555 09-03-2019 06:46 PM

You can make it without much effort.

Here's one guide that's easily followed at home:

https://www.instructables.com/id/How-to-Distill-Water/

knacker40 09-05-2019 06:16 AM

Have flushed the loop for past couple of days and is looking not too bad now. I did have to remove the reservoir and clean it out as there was a load of white gunk in it which is odd as I did a thorough clean out of the rads before I started the loop.
There is a small spot on the cpu block- more of a stain than anything but doesnt seem to be impacting anything and I dont want to strip it down just yet.


All times are GMT -4. The time now is 07:13 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.