The Corsair User Forums

The Corsair User Forums (
-   Hydro X Custom Cooling (
-   -   Tools for preparing hard tubing (

jrwininger 06-22-2019 02:05 PM

Tools for preparing hard tubing
Are there any recommendations on a good tool kit for bending/preparing ends of hard tubing?

Zotty 06-23-2019 03:26 AM

Hi Bud... you would certainly be wanting a fine toothed Saw for cutting it and some fine sandpaper for smoothing off those rough edges cutting left...

As for bending. heat gun would be what you want.. as for Mandrels (the 'Form' used to create the angle you need) loads to be found online...

and lastly you would need a silicon tube insert to stop the tube deforming/collapsing when you bend it...

Hockster2 06-23-2019 07:30 AM

If money's no object....

jrwininger 06-23-2019 06:57 PM

Is a chamfer tool really necessary?

Hockster2 06-23-2019 07:07 PM

Probably. I don't want glass burrs in my cooling system.

jrwininger 06-23-2019 08:32 PM


Originally Posted by Hockster2 (Post 1009062)
Probably. I don't want glass burrs in my cooling system.

I ask because some people say that sand paper is all thatís needed.

Zotty 06-23-2019 11:52 PM

Assuming you are going for Corsair tubing... chamfer tool and acrilic tubing don't go so will together. Sand paper is recommended imho....

All times are GMT -4. The time now is 08:43 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.