Commander Pro's new firmware is unstable

[sbl8607]

When I turn Corsair Link on today, newer version alarm is come up.

So, I updated Corsair Link and Commander Pro's firmware to 0.3.153.

 

But Corsair Link doesn't show fan speed data correctly.

 

My fans are ML120, and HD140.

 

[ame]

[/ame]

 

Actually, fan RPM is vary and work properly, but Link shows nothing.

Fan#1 and #2's RPM goes up by 3000+ RPM. And goes down to 0. So weired.

 

Sometimes, If I shut the PC down and boot the pc up, so CLCP's all the temp disappear, and 6 fans down to 2. (Link showed both fans 0RPM)

 

 

Can I downgrade CLCP's firmware?

 

CLCP's new firmware seems unstable. I don't want use this firmware now.

[manumoto77]

Hi ,

 

where i can find the old (0.2.136) Commander Pro Firmware?

 

Flashed the New one today and now all Temps are stuck and one is missing,before the Link/Firmware update all was working without Problems!!

[red-ray]

where i can find the old (0.2.136) Commander Pro Firmware?

 

No idea, but for me it's \\RED\F\Corsair\Firmware\ :bigeyes:

CLCP + CLNP Firmware.zip

[manumoto77]

No idea, but for me it's \\RED\F\Corsair\Firmware\ :bigeyes:

 

Thanks...

Yes i now (C:programmData/CLink4/Firmwareupdates) but i deinstall every time the old Clink when update to a new one,and then only 0.3.153 is there...:laughing:

 

edit;

thx its working again...