The Corsair User Forums

The Corsair User Forums (https://forum.corsair.com/forums/index.php)
-   iCUE Software (https://forum.corsair.com/forums/forumdisplay.php?f=280)
-   -   iCUE K95 update error. (https://forum.corsair.com/forums/showthread.php?t=182881)

Kasatome 11-27-2018 04:58 AM

iCUE K95 update error.
 
iCUE states "There is a new firmware version available for K95 RGB PLATINUM 3.21. Do you want to update firmware now?" Upon hitting the update button it fails to "Failed to check for a firmware update." I don't understand. It already found an update, how does it fail to find it again? Is there just a file I can download and input manually? (I have unplugged literally all corsair equipment except for the K95 Platinum, so check that off the troubleshoot list along with reboots)

Corsair James 11-27-2018 09:59 PM

What version of firmware do you have? I'll verify but I don't recall any issues.

Zelkin 11-27-2018 11:27 PM

As I'm currently also encountering the problem, I'll reply as well.

Current onboard firmware is 1.07.123. Screenshot attached.

https://i138.photobucket.com/albums/...2018-11-27.png

c-attack 11-28-2018 05:23 PM

I would be wary of forcing these things. If you are stuck and can't update, let it go until more information is available. There is nothing in that firmware update that you need right now and no information has been posted about it at all. My update went smoothly, or so I thought. It had the unintended consequence of wiping the stored profiles on my K95P and resetting it back to factory defaults.

Corsair James 11-28-2018 09:12 PM

Quote:

Originally Posted by c-attack (Post 982611)
I would be wary of forcing these things. If you are stuck and can't update, let it go until more information is available. There is nothing in that firmware update that you need right now and no information has been posted about it at all. My update went smoothly, or so I thought. It had the unintended consequence of wiping the stored profiles on my K95P and resetting it back to factory defaults.

Firmware updates shouldn't wipe the profiles (FW is saved to EPROM but HWP are saved to Flash).

Quote:

Originally Posted by Zelkin (Post 982480)
As I'm currently also encountering the problem, I'll reply as well.

Current onboard firmware is 1.07.123. Screenshot attached.

I'll investigate this.

c-attack 11-29-2018 07:07 AM

Quote:

Originally Posted by Corsair James (Post 982655)
Firmware updates shouldn't wipe the profiles (FW is saved to EPROM but HWP are saved to Flash).

I was surprised as well. However I likely described the event too casually. I do not think it wiped the memory, but rather a reset was performed since HW1-3 went back to the original default spiral/rain/wave settings. I had taken the K95P off to work with my K70 for a bit and got red triangle when reconnecting. Restarted the service and app, but it did not work. Reconnected the usb and it did. No gremlins leaning on the ESC key during the process, but it appears it reset.

crayb08 11-30-2018 01:38 PM

Same Issue
 
2 Attachment(s)
K95 Driver update failing. Then removes my keyboard from my devices and I have to restart the program for it to show back up, then the update is shown available again, repeats the process. Anyone find a fix for it?

crazyboy1111 12-02-2018 01:57 AM

same issue
 
i have the same issue with firmware update, everytime i click on update it will start loading and then my keyboard will disconnect from the computer. so i cant proceed with the update, then it will display the "update failed" message.

Jlamourx 12-07-2018 02:16 PM

EXACT Same Problem!
 
I too am having the EXACT same issue down to the point where I attempt to update the firmware and it removes the K95 keyboard completely from iCUEwhich then forces me to restart so that I can even see it. Since this is not anomaly please fix this iCUE or allow consumers to download the firmware directly from the download page.

Kaprice 12-12-2018 04:00 AM

I can confirm the same issue is happening with me. Update fails. Keyboard is removed from the hardware list. Forcing iCue closed and then restarting it brings the keyboard back. But, the update still didn't take. AND, the hardware slots for profiles have been cleared.

PJH 12-12-2018 09:13 AM

Hey, hey!

Tossing myself into the ring. I also encounter this dastardly gremlin. Like crayb08 mentioned, that is exactly how it happens with me. I've stopped trying, and leave it at that. My firmware for K95 is 1.07.123.

If I click update, it fails and removes the K95 image from iCUE. Restarting iCUE resolves the issue.

The only difference is, I do this under Settings, not from an update option in the bottom right of iCUE.

theringnebula 12-18-2018 03:33 PM

I just got my K95 in the mail and I am having the same problem. It has firmware 1.07.123 and I get the error when I try to update it and have to restart.

Vassilis008 12-20-2018 07:25 PM

Quote:

Originally Posted by Corsair James (Post 982655)
Firmware updates shouldn't wipe the profiles (FW is saved to EPROM but HWP are saved to Flash).



I'll investigate this.

Hello,

Is there any solution to this issue? I'm also getting the same error with firmware 1.07.0123. Switching usb ports does not solve it. Thank you.

Masonx23 12-21-2018 02:25 AM

I am also having a problem with this firmware update. Fails almost as soon as it starts updating. Every other Corsair product I have is updating fine except my keyboard :( I also now just ignore the update. Had an update for my RAM today so decided I would try my K95 again, failed. I'm now done with this firmware update for the K95. Hoping the next one works better.

Coolmatter 12-22-2018 09:56 AM

I bought the K95 RGB Platinum rapidfire 3 days ago.
Same problem here!


All times are GMT -4. The time now is 02:16 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.