The Corsair User Forums

The Corsair User Forums (https://forum.corsair.com/forums/index.php)
-   Cases (https://forum.corsair.com/forums/forumdisplay.php?f=189)
-   -   SPEC 06 Front LEDS and LNP (https://forum.corsair.com/forums/showthread.php?t=180132)

pjschaffer 08-08-2018 10:45 AM

SPEC 06 Front LEDS and LNP
 
I just completed a build in the SPEC-06 RGB case. I have a LNP with a fan hub (6xML120 fans) connected to one channel and four LED strips connected to the second channel.

I'm wondering if I can disconnect the front panel LEDs from the three button controller that comes with the case and connect it to the end of my four LED strips. I haven't seen any info that states one way or the other if the front panel LEDs are compatible with the LNP.

Anyone have any thoughts on this?

Phil

Corsair Caliente 08-08-2018 12:58 PM

Unfortunately you won't be able to do that. The plugs won't match up. The front panel LED plug is male. The end of the male strips are also male.

You won't be able to attach the strips to the end of the front panel then plug it into the 3 button controller either. It won't power on.

pjschaffer 08-08-2018 06:02 PM

That's too bad. It would have been nice to get the fans and LED strips working together with the front panel LEDs.

Zeek 03-06-2019 09:27 PM

I got the front panel LEDs working with the Lighting Node Pro, You'll have to modify one of the wires with 2 Male ends(notice is missing pin 3 wire)by adding an extra wire and crossing pin 1 and 3 at one end. Now connect the Male ends to the LEDs and one of the Led channels of The LNP. Set the channel to 3 RGB strips or it wont light up all the way.http://oi66.tinypic.com/2pq850k.jpg

Zeek 03-06-2019 09:32 PM

I got the front panel LEDs working with the Lighting Node Pro, You'll have to modify one of the wires with 2 Male ends(notice is missing pin 3 wire)by adding an extra wire and crossing pin 1 and 3 at one end. Now connect the Male ends to the LEDs and one of the Led channels of The LNP. Set the channel to 3 RGB strips or it wont light up all the way.http://oi66.tinypic.com/2pq850k.jpg

Lorenzo.M 07-19-2019 08:55 AM

Hi, I'm really interested in your solution as I have a close configuration (5 ML PRO on LNP in spec 06 RGB).
I have a standard male to male two wire cable and of course the front strip won't light up if connected to the LNP as a standard strip led.
As I never worked on such cables, could you please explain what do I need to manipulate the cable and add the third wire?
Thank you very much.

Zeek 08-20-2019 03:02 PM

Here is a link with more info
https://www.reddit.com/r/Corsair/com...e_spec06_icue/


All times are GMT -4. The time now is 08:34 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.