Jump to content
Corsair Community

LL120 Fans intermittent flashing RGB


Kwisatz

Recommended Posts

My fans RGB have almost completely stopped working. They flash red intermittently but for the most part stay dark. I have the Lighting Node Pro and Channel 2 works fine, where the LED Strip is connected.

 

This all worked fine two days ago. I tried replacing the Node Pro and same results. Also reinstalled iCUE to no effect.

 

I've attached images of my current setup and a gif of what the lights are doing. Any help would be appreciated.

236030313_LightingSetup.thumb.png.2b43d8398d6ce432e93ff50ad3a3d882.png

411162078_FanLightingProfile.thumb.png.782fd7b936fc717243e93160ebb19934.png

ezgif-3-e9681926c768.gif.e733eb43b31ec8590f4558f6233a7add.gif

Edited by Kwisatz
Link to comment
Share on other sites

It's possible that you have a bad fan. Have you tried to rearrange the fans at all?

Here's the thing - these fans operate in series. Fan A sends the signal to Fan B which then passes to to Fan C ... and so forth. The fan hub exists to facilitate this.

So one bad fan can take down the lot. You need to try them one at a time. Once you have one that you know lights up, put that in slot 2 and make sure that both fans light up. If that's the case, then the fan in slot 1 is good.

Link to comment
Share on other sites

×
×
  • Create New...