The Corsair User Forums

The Corsair User Forums (https://forum.corsair.com/forums/index.php)
-   Solid State Drives (SSD) (https://forum.corsair.com/forums/forumdisplay.php?f=188)
-   -   MP510 960 Temperature (https://forum.corsair.com/forums/showthread.php?t=187811)

saw125 05-31-2019 02:59 AM

MP510 960 Temperature
 
How are users monitoring drive temperature, AIDA64 does not show a sensor for this drive?

Zotty 05-31-2019 03:12 AM

iCUE would/should do this buddy

Yemble 05-31-2019 03:26 AM

Quote:

Originally Posted by saw125 (Post 1006348)
How are users monitoring drive temperature, AIDA64 does not show a sensor for this drive?

The latest version of AIDA64 definitely does monitor the drive temperatures of the MP510 960 drives. I have two of these in RAID-0 on an Aorus Master mobo alongside a single Samsung 970 Evo+ 512Gb drive. All three are monitored correctly with AIDA64.

Note that I had to disable one of the AIDA64 "Safety" settings concerned with RAID (I can't remember which one) to prevent the OSD sensor text from disappearing and then re-appearing after a few seconds on every refresh. Once done, it worked as expected.

saw125 05-31-2019 04:35 AM

It is not in raid, AIDA 64 does not show product information or driver update for this drive, Sisoft sandra does not show a sensor. iCue system information shows sensors for my other 3 drives but not the MP510. It is only to see how well the asus mobo heatsink works or not

Yemble 05-31-2019 06:17 AM

Quote:

Originally Posted by saw125 (Post 1006369)
It is not in raid, AIDA 64 does not show product information or driver update for this drive, Sisoft sandra does not show a sensor. iCue system information shows sensors for my other 3 drives but not the MP510. It is only to see how well the asus mobo heatsink works or not

This maybe a BIOS issue concerned with the NVMe revison (the drive is rev. 1.3 May 2017). Is your Maximus BIOS up to date?

Your other option is the Windows 10 ACHI driver stack, and / or, the Intel chipset drivers. Have you upgraded to the latest Windows 10 Build 1903 yet? Obviously, because I have my drives configured as RAID-0, Windows uses the Intel RST driver stack rather than its native AHCI stack. I doubt that this is the root cause of your issue, but it is a difference.

Somebody else will need to chip in at this point, who is not using RAID.

saw125 05-31-2019 11:24 AM

Yes it is a new build and the bios is 19/03. I am also using Windows 10 build 1903. I have seen users commenting on high temperatures on other sites but could not see how. I think as you suggested that it is a bios issue but I have looked through all the settings and cannot see anything related to NVMe that I can change?

saw125 05-31-2019 11:53 AM

Corsair SSD toolbox shows the MP510 temperature and temperature is ok but I cannot monitor it like the other drives. iCue, AiDA 64 and Sisoft sandra do not show a sensor for this drive?

saw125 05-31-2019 12:07 PM

Thanks for the replies above but it looks like a software issue, iCue, AIDA64 and sisoft sandra do not show a sensor for this drive. Corsair SSd toolbox and HWinfo do?

Yemble 06-01-2019 11:16 AM

Quote:

Originally Posted by saw125 (Post 1006405)
Thanks for the replies above but it looks like a software issue, iCue, AIDA64 and sisoft sandra do not show a sensor for this drive. Corsair SSd toolbox and HWinfo do?

If HWinfo is working, then AIDA64 should work as well. There are three Asus specific settings in the Stability section of AIDA Preferences, as well as Low-level SMART operations. Have you tried enabling them?

Are you running the latest AIDA64 beta, v6.00.5107?

Schrotty 06-18-2019 01:16 AM

I use 2 MP510 and latest AIDA show me only one drive with temps.

trickle_38 07-26-2019 02:54 PM

HWInfo shows different temperature (47) than on my MP510 than SSD Toolbox (47)....:-( and AIDA shows completly different (35). All deg.C


All times are GMT -4. The time now is 12:11 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.