TheGamerGuy Posted February 8, 2015 Share Posted February 8, 2015 When using the Corsair M95 Mouse Configuration software (Info: Software: 1.00.00.14 Firmware: 2.24 Windows: Windows 7 Ultimate 64 Bit) I go into Manage Performance and do a test with the Surface Quality I am using a Corsair MM200 mouse mat and I only get 3/5. When I remove the mouse mat and use my M95 on my wooden desk I get 5/5. Am not sure if I should be worried here or if its a issue? How can my wooden desk get 5/5 but my MM200 mat only gets 3/5. So should I be using the mouse without a mouse mat then? Thanks! Link to comment Share on other sites More sharing options...
RafaLL92 Posted February 8, 2015 Share Posted February 8, 2015 Hello, I have got the same 'problem' with my MM200 and M95. My desktop scoring 5/5 whereas MM200 just 3/5. I would also like to know if this measurement is a one that can be trusted ie. should I ditch MM200 in favour of my desk surface? Thanks! Link to comment Share on other sites More sharing options...
Toasted Posted February 8, 2015 Share Posted February 8, 2015 I wouldn't rely on that test. I have tried the test on the MM200, desk surface and basically every other kind of material e.g. paper, magazine cover, etc and could not get it past 1/5. Link to comment Share on other sites More sharing options...
TheGamerGuy Posted February 9, 2015 Author Share Posted February 9, 2015 I wouldn't rely on that test. I have tried the test on the MM200, desk surface and basically every other kind of material e.g. paper, magazine cover, etc and could not get it past 1/5. Hey Toasted, Thanks for the replay! I will continue to use my MM200 in that is the case. I also tested it with A4 paper and only got 1/5 lol. Thanks! Link to comment Share on other sites More sharing options...
badomen24 Posted February 12, 2015 Share Posted February 12, 2015 I can't ever get past poor with mine either no matter what surface its on, but it also seems like the laser or whatever is doing the tracking isn't working because sometimes I can even get the windows cursor to move with it. Link to comment Share on other sites More sharing options...
NewOrder Posted March 25, 2015 Share Posted March 25, 2015 Is there a way for me with an Sabre RGB to try this utility? It's using Corsair Utility Engine. Or is it only for the old mice? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.