antonyfrn Posted September 11, 2009 Share Posted September 11, 2009 Ok i got my case two days ago everything was fine and perfect with it now I’ve noticed a small chip of paint missing near the button to release the windowed side panel. Few issues ive noticed with the case other than the paint issue. Lower case area where the PSU sits the grommets could do with being moved forward by 1 inch as the first one is covered by a normal size PSU. Causing a bulge in that area and the rear panel to pop off on its own. Side panels locking mechanism could be better as a few times I’ve had panels pop off on there own. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted September 11, 2009 Corsair Employee Share Posted September 11, 2009 Thanks for the suggestions, I will bring it to the attention of our case and cooling product manager. Link to comment Share on other sites More sharing options...
antonyfrn Posted September 11, 2009 Author Share Posted September 11, 2009 also should add that the case aint too friendly with a PSU Where the 24+2pin cable is on the right hand side of the PSU also you cant turn the psu to make it fit more easy. a back plate for the psu mounting that can be turned would fix this issue. BTW is there anything i can do to stop the paint chipping anymore? Link to comment Share on other sites More sharing options...
jrock75 Posted September 15, 2009 Share Posted September 15, 2009 I also had some paint chip off on top when I put the screws in for my fans. Only two very small chips but it does reflect some added attention to the paint process. Link to comment Share on other sites More sharing options...
Shelby Posted September 15, 2009 Share Posted September 15, 2009 Black nail polish will do the trick for now Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.