Jump to content
Corsair Community

How to fix loose wire


NicholasUchoa

Recommended Posts

Sure can, get "wire glue", you can find that on amazon. Follow the instructions and it could do the trick.

 

OR! You can take that metal clip out of the connector, buy a measly foot of wire at your local home depot and some electrical tape and cut and add as you need.

Link to comment
Share on other sites

  • 2 weeks later...
Sure can, get "wire glue", you can find that on amazon. Follow the instructions and it could do the trick.

 

OR! You can take that metal clip out of the connector, buy a measly foot of wire at your local home depot and some electrical tape and cut and add as you need.

Thanks i might try that!

Link to comment
Share on other sites

  • Corsair Employee
Vegan is suggesting to pull the metal socket from inside the plastic connector housing, then solder the wire to it. This is the proper way to permanently repair it, as you don't want loose electrical connections. However, I would suggest RMA'ing the PSU at corsair.com/support, especially if you're not familiar with, or comfortable using, a soldering iron.
Link to comment
Share on other sites

×
×
  • Create New...