Jump to content
Corsair Community

PSU connections for R9-295X2 to AX860


freestylar

Recommended Posts

Hi all,

 

I've just ordered a R9-295X2 to put into my system and I have been told the AX860 is quite capable of supporting it if I'm not intending on overclocking anything in my system. However the card needs 2 PCI PSU connections that carry at least 28Amps each totalling 50 Amps at the card, so I'm wondering which 2 connectors would be best to use off the PSU?

 

http://www.amd.com/Documents/Selecting-a-System-Power-Supply-for-the-AMD-Radeon-R9-295X2-Graphics-Card.pdf

 

So I'm not sure how the Amperage and Voltage is spread across the connections on the PSU and was wondering which connections would be best. I've attached how its currently setup and where the PCI connections would be best in my opinion but also don’t know if I should do something like Option 1 or 2 to spread the connections out.

 

CURRENT: http://imgur.com/lXxlWil

OPTION 1: http://imgur.com/Vk4PYa0

OPTION 2: http://imgur.com/FAVut6c

 

Any help, experience or info would be great, thanks.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...