Weltall43

BlaiseP, thanks for the response. I will try this tonight/tomorrow!

I got it from Amazon, so that shouldn't be an issue. I did try setting all of the pins to 3-pin, and it shut them all down. Turned it back to 4-pin and they all work again. So it is def. recognizing the fans and has *some* control over them. I figured I would have issues with the RGB control, but that works flawlessly.

Sigh...I have tried everything I can think of. Fingers-crossed someone can help :/

I set up a Custom curve to my GPU and there were no changes. My GPU is sitting around 27C, which means the fans should be at 600 RPM according to this chart. I am still going from 800-1500-800-1500-800-1500 every couple of seconds.

Fixed % does nothing. I have tried setting the value to 10%, 20%, 40%, 60%, all with the same result (ramping up/down every few seconds):

I will try this too and report back.

Thanks, I will try to adjust it first to the GPU and then set up some of the temp probes. I still don't understand why setting it to a fixed RPM of "850", for example, doesn't work. It may not be ideal, but shouldn't that be straight forward and work accordingly? If so, the fans are still ignoring the iCUE settings. Also, I'm not sure why my images were removed. I will try to add those back if that helps.

Hello, I hope I am providing enough information. If not, please let me know and I'll try to update. I completed a new build tonight and am using iCUE for the first time. I would very much appreciate some help with this, so thanks in advance to anyone who can assist. I have 6 ML120 fans connected to the Commander Pro for fan control, and I also have a h115i Pro XT connected to it. I got the RGB lighting working for 6 fans pretty easily and I can see all of my fans in the menu. The fan control for the h115i Pro XT seems to work accordingly, per these screenshots when I adjust settings: Balanced Extreme Now, when I adjust settings on the 6 ML1200 fans that are not attached to the AIO, they just seem to go from 800 RPM to 1500RPM, back and forth, about every 3-5 seconds. This happens with minimal load and no mouse movement at all. I have tried setting them to fixed 850, Quiet, Balanced, etc and the result is always the same: I checked some settings and the Fan ports were set to Auto, so I changed them to 4-pin, but the result was the same either way: As for hardware configuration: the Commander Pro is connected into the F_USB2 on my Aorus Master motherboard. There is nothing in F_USB1 if that makes any difference (kind of a newbie). I have a Lightning Node Pro connected to the Commander Pro to control RGB. The CPU is a 3900X.

First, thanks for your response. I would actually prefer RGB, so it is nice to hear there are big performance differences. I thought there would be a big difference in noise levels. If not, I will leave it as is.

Hello and thanks ahead for any responses. I am trying to learn about cooling and was curious if: 1. It would be a good idea to replace the ML fans on the H115i Plat or Pro XT with Noctua fans? 2. Has anyone done it here? If so, which Noctua (model name if possible!) did you use? 3. How was performance comparisons? I am hearing complaints that the stock fans are way too loud and was hoping to avoid that.

I ordered the 360MM on Amazon when I thought the release date would be soon. It was originally listed as January 13th. Now, it says the product usually ships "in 1 or 2 months". Can someone from Corsair please provide an update on this item? I cannot wait that long, as this is the last piece holding up a build.