Jump to content

QuiKS1lv3R

Members
  • Posts

    9
  • Joined

Reputation

10 Good
  1. OK so I ran into this issue the last few days. I have The Polaris MM800, and I have my Dark Core SE dongle plugged into the port on it. The lights on my MM800 just randomly stopped working and it just wasn't in the devices section on iCUE however my mouse was still working (using the passthrough on the MM800) so I knew it was still working. Upon start up/shut down of my PC the MM800 went back into default mode of rainbow lights, so I knew the MM800 lights were still functional and it was receiving power, and due to the passthrough knew that the USB was also receiving data as well as power. I tried different USB ports on my PC, I tried uninstall/re-install of iCUE. I would've tried updating firmware on iCUE but it wasn't seeing the MM800 at all. I fixed it by going into device manager on the control panel, I scrolled down and opened up the "Universal Serial Bus controllers" section. I had lots of devices in there, 5 of which were entitled "USB Composite Device". One of said composite device's had a warning triangle instead of the USB plug symbol, I right-clicked on it, and clicked "update driver using internet" and the warning triangle disappeared and all lights came back on for the MM800. Hope this helps anyone else having the same issue
  2. I really hope this happens so that my RGB bulb in my ceiling light will change when I load games along with my PC & peripherals
×
×
  • Create New...