ToothlessRaider

Just to update a friend took mine back and exchanged it for me. Seems the one I bought the first time was possibly "used" because the second time, the mouse looks cleaner, feels stronger and the coord was wrapped tighter. So possibly the store put a preowned product out as new? Either way second time was much better. Really like the M65 Pro. My old razer mice all have the same issue of the left clicker dying early and dont really fit my man claw that well. Your mouse seems to embrace my meaty paws much better.

Hi Thanks I will do that.

Hello, First, my ram, one of my AIO and my PSU are from corsair and I really like them. Sadly, my M65 Pro is my first bad experience and I cant even replace it due to lack of ability to travel. I am a disabled person, and I can only get a ride on the first and 17th of the month. The store has a 14 day return policy. I bought a Corsair M65 Pro, but the mouse came damaged on the coord cabling Just sucks because I am now stuck with this damaged mouse with no way of returning it before the return window expires. I hope you improve your quality of mice because I have bought many products from you but never seen such lack of QC before. Very dissapointed. I regret for the first time, choosing Corsair.

Hey you! You helped me fix my H100iGTX issue with fan 0 rpm last month. Ty for that, yeah I decided I should get a new aio with a new warranty to sleep better, as my temps are getting warm. The AIO MUST be kept at extreme or it gets too hot Coolant temp is 40.20c Here are my aida readings Peaking as high as 94c. I am hoping for some better temps.

Hey all, my H100i has lasted 5 +years across 4 different pc builds. But its not cooling my I7 9700K all that great, hitting 75C to 80C in most pc games and peaking spikes as high as 94c. I bought the H115i RGB PRO XT and a new case, CM H500.(replacing this 10 year old MK1 Chaser) My question, how well will the H115i cool the I7 9700k? I am hoping better than the H100i GTX, 2x 120mm vs 2x 2800mm and 5 year tech difference, should keep me under 65c? ty

Anyway to give you best answer? I fixed the issue, I infact had the fans directly to the mobo and NOT into the dedicated fan inputs of the aio. I gutted the entire PC, cleaned the dust, removed existing thermal paste, reapplied paste and reconnected all connections(with improved wire management too). Many thanks!

Ok I checked and yes the fans are connected via the splitter. The 1 (short cord pin female) goes into the cpu_fan header The longer coord leads behind the pc which are many connections, 2 of which are in a splitter, but also an rfb box back there. I replaced the fans from the stock corsair fans to the same mode size and make fans, just rgb enabled about 4 month ago when I upgraded from the i7 6700k. It never showed on that pc either, but like this 1, that one ran ok, and a little cooler, which like you say, 9700k isnt a "cool" cpu TY again for the help, I might just buy a replacement as I dont think my 212 would be well suited for the 9700k

before I go to bed, I wanted to share the temps the pc displays having been on all day with having played FO76 and State of Decay 2 and a movie Temps are not the worst, but I am going to take the side off later and will confirm whats what.

I have had this aio for about 2 years(I never registered it sadly) and for as long as I can recall, it never showed a fan working under CPU_Fan Idle temps range from 28C to 45C depending on temps in the house, gaming temps range from 65 to 77C Ill have to take the other side of the case off to double check where I have everything connected, I put as much cabling as I could on the other side of the case for best air flow possible,but I need sleep atm, Ill confirm it later when I get up. Also ty for your help in this matter.

Ill go make sure its set to 100% now. Also the 1 fans are connected to the splitter which in turn connects to my motherboard. I have a total of 7 fans in the case, 1 120mm in front 2 80 mm one on side one on back then 1 120mm on top and 1 80mm on top plus the 2 fans that are attached to my h100i gtx The fans are set to a pull push config, pull from front and top and push out the back and side, so air flow is moving for the other parts in the rig.

Ok I rebooted with same outcome. I made 2 videos 1 of bios one of inside the rig https://photos.google.com/share/AF1QipMkSIsOp3m5hlWqEy-UHU__kAMRzxbrci9VM7zX4C7KZvYaLFuQam88JxtDTEMeWA/photo/AF1QipNukw79d87MnHFtaMUqoHNQ09V4z_WL3O2B2-Vw?key=YnZpUVJuREZNR1U1V0hkOGFyaHl6V0RNVWpqZl9B The other video isnt uploaded to my google yet. I do have a brand new Hyper evo 212 in the closet in case my aio ever died, should I get it ready if my cpu fan is reading zero?

Hi ty for the reply. I dont have any Gigabyte software installed on my pc. I have HWInfo, MWMonitor, MSI Afterburner and Precision X1(need afterburner for osd, and precsion x is for gpu fans) But I installed them after since the corsair cue wasnt showing. Also the bios says 0 It has always said that from day 1 and I always figured it was because my "fan" was a cooler(aio) gonna take hger apart and take a few pics now. My pc on full load in games like fallout 76 and COD Warzone go anywhere from 60 to 75C on 1 or 2 cores. My pc has been on all night and I have been surfing and watching movies for the past 2 hours, here are my temps This shows temps while in FO76 [ame] [/ame] (just uploaded so wont be out of potato mode for a little bit). Ill take some pictures of the inside of my pc and post what I see if that would help? As for the 12v for the Z390UD "All the four fan headers on this Z390 UD supports up-to 2A x 12v so 24W." from gigabyte forums

Hi, mu cpu is i7 9700k on a z390ud mobo The cpu fan shows n/a Attaching some screen shots, does this look normal? Thanks Are these temps normal? And is it supposed to read cpu fan n/a because its an aio? The 2 fans on the h100i are working fine. TY