empleat

Nvidia guy bet on PSU :D: Yeah it will be safer to RMA both. THanks for help!

Yeah at this point: it will be safest to RMA both PSU and GPU. I doesn't matter much anyways... If I already go there. I wanted to exclude GPU, but I don't have how. I don't know, if in this specific case, it can be GPUs fault too. But better safe then sorry. I don't want to wait 60 days total, if first RMA shows, it wasn't caused by that.

ASUS Z390-i gaming Intel i5 9600KF GeForce® RTX 2070 SUPER™ WINDFORCE OC 3X 8G I think this is my ram, if not have generic not for AMD - F4-3200C16D-16GTZR Corsair RM650x (2018) I was using PCI-E vertical mount for GPU and had voltage drops under 11.72 on PCI-E rails. But i tried on old motherboard GigaByte b75m-d2v and I didn't notice dips in HWINFO under 11.72, but I can't read raw log! So I am not sure about that and support didn't answer to this straight. He only said something (like another issue) that 75W from motherboard should be drawn first and didn't explain why... I can link that: https://www.nvidia.com/en-us/geforce/forums/notifications/topic/200450/ UPDATE: it is probably PSU, as pci-e port on different motherboard (using same PSU) is undervolted. Not likely 2 mobos would have same problem!

Yeah that's one way to look at it. I thought I had PSU, which had marked one for CPU specifically, or it was in manual perhaps. And not like 3 grouped at one place. Also holes for PCI-E were green, so the cables. While CPU slot was not! So this was confusing! As there is no explanation in manual...

Hah, so i still need RMA :(: Thanks for the answer! Not sure why CPU and PCI-E slots are marked differently on PSUs, if it doesn't matter?!

Not entirely sure. I have RM650x (2018). There is no manual! And markings on the PSU are confusing! I am sure I connected PCI-E cables to a GPU and CPU cables to a CPU. What I not sure of: maybe I connected one PCI-E cable into the CPU slot on the PSU! And a CPU cable into the PCI-E slot. I have consistently, over multiple windows installs, issue with Nvidia control panel disappearing! And Nvidia support said, it could be: because driver is crashing! So I did Firestrike and I got results: PCI-E rails are undervolted under 11.72v. And some problem that GPU is maybe not taking 75W from motherboard first, I don't understand it. Could this be caused by cable connected in opposite? Before I connected cables to the PSU, I was wondering same thing - which goes where... And video I watched just now, seems familiar. I probably got it right. Just to recap: I have this one: https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcRsJXH1H6tb62_NkOjQwpfF3nOzP_ZyltFUdA&usqp=CAU Also if it is hard to see you can watch this video: [ame] [/ame] 3 slots in the bottom right above white text which says: 6+2 PCIe & 4+4 CPU. I think: I put PCI-E cables into 2 slots from the left. Is this correct? Before I rebuild my whole PC again to test this, or RMA. Thank you very much!

If by kettle lead, you mean default PSU to outlet cable. Then yes. I don't hear cracking noise. I can't connect cable more tho, it holds there firmly already. I know how much force is needed. And i pushed it normally in and it doesn't go further. I would have to use like extra large force at this point, i don't think thats it. In old PSU it went fully in, using same force, now it won't even move more, even to the side, not even little! I don't think connection of cables is problem. As i built computers over 10 years and i know how to connect it and then it is secured. But gonna probably check all cables nevertheless... I will also check socket for obstruction, but this was since it was new and i read it is ok. But now i have problems so i was asking... Thanks for the tips!

Thanks for quick answer! Hope it is enough, one photo wasn't best!

Hello, i have problem with PCI-E undervolting. So i am trying to find out, what is the cause! Is it normal, that on RM650x (2018) outlet cable, part which goes into PSU, is sticking out and doesn't go fully in, in opposite of other PSUs? Also using 2 other cables for GPU. So that's not a problem. BTW can i use iCUE to set the power to a SINGLE RAIL PERFORMANCE? This told me Nvidia support to do. But no device is detected in iCUE software. Thanks!

I have extremely large hands and have problem to get mouse, i was using razer death adder and even that i did hold only with finger tips, or i was loosing grip during game, or all the sudden hold mouse differently as weird as it sounds. I was long time searching for larger mouse, which don't weight more than 105g and isn't laser. And has width at least 80mm, so i was glad when i saw this product. On length i have 19 cm hands and 12 cm width, this mouse is like 127, or 130 if i remember correctly on length. So to my review: It is all hard to describe, how grip feels etc. hope you get it. -it could be longer: my fingers on right side overreaching and if i hold it with rubber grips, when it is meant to, i have to bend my figers little, while i would rather have them relaxed in normal position. -it could be higher on right side, left side is higher, where is thumb and it is not needed :mad: , but on the left side i barely fit ring finger and pinky together. -width is not what it seems, yet there was mouse has 80mm or so on width, but there is comfortable hole under side mouse button, where manufacturer intended that mouse will be held, but if i held it here, mouse all the sudden starts to feel very slim, there is slope from this place down, but it is inclined and it is not comfortable to hold mouse there + there is less grip So when i put thumb into that hole indended where mouse is supposed to be held, than i have to bend my ring finger and pinky even more. -also it is hard to press middle mouse button and if you use it for scrolling in rts, it is difficult to press it again shortly after previous press Now i think about it, to describe that feeling, when i hold mouse at parts which are intended for grip like that spot for thumb under buttons, it is like holding mouse only at front and almost no grip at any other part of the mouse and yet it is worse because end of the mouse is sticking out and you to more stretch your fingers. In conclusion, it is not worst shape, but i am so unsure, i will probably have to return this product. It far from comfortable for me and grip is like 60-70% I don't have good control. I will test it out yet, but... I just have bad luck, i was waiting years for mouse i can use and still can't find it. I should have born after 20 years, when you 3d print mouse exaclty for your hand...

So i got corsair ironclaw and cable is so stiff i put it into bungee, but when i move mouse cable cause resistance and than my mouse cursor moves back, when i release mouse. I used razer death adder, which had more manageable cable. It already takes hours to smooth it, i don't understand why manufacturer break cable, instead rolling it to the circle, so it is smooth........ I have no experience with this cable type, i don't even know if you can smooth it. And that type of bungees which cable hanging from top i don't like. I will have big table so i can put more cable on it, but wtf why ?

So i didnt even got my answer yet. Does this mouse work in ps/2 , because a lot wont. And do you know if ps/2 support up to 500hz ? And how confortable it is if you have hand lenth 19 and width 12cm. I hope someone with large hands could tell me i have so large hands even razer da, is very unfomfortable to thin and short even on length, my ring figer overreach. CAn someone answer this ? And does razer ironclaw remember dpi, even if you uninstall software. Because mouse software usually cause lag. And can be mouse set to 600 dpi ? Or custom value ?

What motherboard you have my doesnt support msix even for usb3 ? So it probably doesn't evne work in ps/2.

Hey, does irownclaw support ps/2, because usb is trash and doesn't support msix multicore support for interrupts and cause high dpc. Also ps/2 has lower latency, than usb. I know it doesm't check like usb, but sent instantly data as ready. Don't know how much it can send, but i am playing on 500hz anyways. PS/2 can sent 500 updates per second right ? Second question, someone who has large hand can tell me how comfortable this mouse is ? Length me: 19 and width 12cm. Is it long enough? I have currently razer da and it is to short and extremelly thin. Because i have extremelly large hands, i am afraid my ring finger will still overlap.