fishburger20

my ram gets hot when gaming for extended time,the ram gets to hot i found out after a long search I see that corsair sells fan for the ram my ram is corsair venegance led: CMU16GX4M2C3200C16R ,what ram cooler will fit this ram?

I am running a kabylake i7 7700k at 5ghz steady at 35-37 c gaming ,and never above 50 in cpu test. 6 140 fans in push/pull on a 420 rad,if you go for this solution you need 3 corsair fans ll,if you want led fans the pull fans can be any brand,mine is noctua as I had 6 of them.the pull fans with led will not be seen,so no need for led fans on top.Fans running at 1000rpm

hello my friend,well the pc is up and running now sofar with only 1 gpu instaled waiting for backplate for number 2 was ordered,but my store made a mistake and ordered a wrong one,did a test in 3dmark time spy today and scored 11711 points,still working on overclocking my one card,temp on gpu in stress test not above 45 c and fans running 1100rpm on 2 480mm radiators.comparable score in 3d mark was in the 92% on this rig now.I am happy with results.The case is almost filled up and dont ask about the wire managment in back of the case (spagetti is the right word)

yes a plan I have Zotty,I will go modular,I will probably use plywood and alu and quick coplings between moduls. The way I see it is that when you buy a new case,you are confined to that space,like take it or leave it the plan will probably be a winter job,as the mc season is starting soon. will take some Hungarien guys to north cape this year.

Hello my friend well the case is big,the glass look s good,but entusiast case it is not. But I will take out the back panel an redesign this panel,and make it to fit duel vertical gpu cards.The vertical mounting bracket I will take from an other old case that I have,it is a simpel operation ,cut,drill and screw,still waiting for the backplates for my new cards,Ek will start shipping today.

is there any place I can buy a new tray to mount 2 times 2080 rtx card in my 1000d,I want to mount them vertical ,the one tray that came with the case has 4 slots,will fit 2 cards, but no space between the cards.I want to run these cards in sli via nv-link. the nv-link comes in 2 sizes 3slots or 4 slots,will any of this 2 fit my setup? Both gpu cards will be water cooled with EK waterblocks,and what about place for the backplate on the front card?will it be room?

hello Zotty if you want trays you can have my 5,I will never use them you get them for free,just the the postage to uk if you want them. I am upgrading my gpu next week,I bought 2 asus rtx 2080 ti rog strix today,waiting for EK waterblocks(10 days) sli with nv-link looking forward to some serious gaming(fps)

Any toughts on the new amd cpu and gpu relase this year?I have been running nvidia and intel for the last 23years but getting tired of changing my mb when a new cpu comes on the marked,waiting for tests,if ok I will probably change my i7 7700k and asus rog strix mb.My i7 cabylake is running at 5ghz steady,thats a nice cpu.

I instaled the SilverStone mod:SST-ECU01 ,this card gives you 10Gbps,no problem,it has place for 2 cables ,usb 3.0 19pins connector

yes, you got to be careful thees days,if it works dont touch it, happy holidays to all in the 1000d group

I just had a problem with one of my m2.disks samsung 960 evo 500gb read/wright speed ,vent down to almost zero after a firmware update. I was running 2b7qcxe7 and was made aware by samsung disk managment that new firmware was avaiable 3b7qcxe7,it killed the disk.It seems that this is a known problem on forums on the net,and you cant change it back to he old firmware,there is a fix for the 970 evo but not the 960 evo.Samsung sent me a new disk trough my dealer,good service.

all fixed.quiet and nice.

I like to have control of my fans ,is there any way of setting a set rpm for each group of fans ? in icue or d-link,I prefer d-link but have icue instaled too,if I uninstall icue will d-ling take over?

well I just finished my case this morning all up and running ,but not happy with the fan controls ,quiet balanced,extrem, based on what input? already thinking on case mods,take away the glass door in the back(that no one sees) and rig a new wall with brackets to mount 2 fan controllers from Nzxt,as it is now the fans are hunting to much, annoying sound

I dont know but might be possible,18 in the head