Stevecorrado88

Quick fill in, went to Best Buy and returned it. They only had the 110i so I got that instead. Hooked that all up and it’s working perfectly. Thank you for the help

I’ll call Best Buy and see what they say. Also I dont know if Corsair is open on Saturday’s but I’ll call them too

The pump is brand new. Not even a week old.

Also notice if I switch USB ports it will light up all the way for 2 seconds then fade Down

Ok so I have the pump plugged into cpu fan, the 9 pin usb plugged into usb910. Cpu q fan control set to dc mode, low limit ignore, fan profile max middle and min set to 100%. Fans are on full blast and Corsair light is faintly lit up. Bios fan profile says cpu fan n/a, chassis fans all working. Still no controls in Corsair link and Universal Serial Bus doesn’t detect it. I have 2 asmedia usb 3.1, 1 Intelr usb 3.0, 3 usb composit drives and usb root hubs 3.0. I don’t know which one it will come up in but I disabled and enabled everyone I can.

Ok I will get back to you if things don’t work out.

Thank you, will this now give me controls in Corsair link if I hook up it right ? I appciate your help.

I’m sorry this is where the confusion is. The link cable I thought was pump power and the pump cable I thought was fan power. My fault for lack of knowledge and not rushing. With that being said I understand now. So should I run the pump power cable to aio pump? Lol now I feel like we are on the same page I hope.

I understand now makes sense, yes it is plugged into usb header. Which I will change and put it into cpu fan and set that to max. Question tho how come I don’t see any cpu fan rpm with my fans plugged into cpu fan header ? I’m using the splitter so it’s 2 fans in 1. If I split them up and plug them in separate I see rpm.

To clear things up, I just read the facts posted in this forum about where to plug the pump in. Tonight I will put th pump in cpu fan and out the fans on cpu fan opt.

I’m a novice when it comes to this stuff. I watched videos and that was what everyone was saying to put the fans. Explain please what you mean by fan header for the pump? So I should plug the pump into a fan slot ? The pump now is plugged into a USB port so wouldn’t that be full power ?

V2 with the mini usb dongle

Just recently upgraded mobo, cpu and ram. Hooked up the h100i v2, my mobo is a Asus z370e and my computer isn’t recognizing the cooler. Fans are plugged into cpu fan, pump is now plugged in usb 2.0 on the mobo. Everything seems to be working but I have no control over it. If I plug the pump into aio pump the light on the pump turns on and off and I hear a click within the pump. I didn’t like that so I used the usb2 on the bottom of the mobo which turns the pump on but the light isn’t bright at all. Downloaded Corsair link and I have no controls, it doesn’t even show the pump or fan. I went to device manager and it doesn’t even see the cooler in any slot I use. In bios it says I have no fan speed N/a * and when I had aio pump plugged in it says N/a. I have no luck with anything I read. Also nervous about deleting the anti virus. I’m not really sure how to delete it anyways when I go to add and remove it won’t let me.