Jump to content

mrshrir

Members
  • Posts

    76
  • Joined

Reputation

10 Good
  1. im lost with what type of fans these are, i need one more for the the case, which ones are they ?
  2. was only necessary as soon as i did push pull on top, original glass left no space for hot air to leave case, this reduced cpu temps by about 5-6c and overall allows the case to ventilate better
  3. look how much i have crammed into the case, its known that the gpu max length is 33cm without a front rad, so its pretty obbvious, get rid of your 360mm and get a 240 or 280 , every gpu will fit in the case expect a few models which are over 330mm. a strix 3090 fits just fine even .
  4. heres my setup, overall good temps, 58c tops on the gpu, my 9900K idles in the 30s and gets to 55-60 in games
  5. mrshrir

    680X Owners

    Ive seen 680build with a MSI TRIO X, its about 32cm long, i mean it fits, im guessing as long as a card is no longer than 31.5cm it should be fine .
  6. mrshrir

    680X Owners

    what are we going to do with these new 3000 series cards which are MASSIVE, i mean i know you get an extra cm if you vertically mount, however due to the thickness of these coolers, i dont even know if they will fit, even regular 2080s were up on the glass, i measured and have gotten about 315mm with just barely room to spare horizontally, and by the look of some builds online, the longest card anyone has fit in a 680x, is the MSI TRIO, at 324mm. i know fora fact that one of the GALAX 3080 cards exceeds 330mm , thoughts ?
  7. i see there is place for 4x120mm on the top, am i able to install a 280mm aio on the top ?
  8. kinda too late for that , my whole case is LL , i have 9 of them,
  9. so im gonna get the H100i platinum 240, i will be using my current LL120 fans instead of the ML fans on my cpu rad, However i was thinking maybe to take the 2 fans i have on my 120 gpu aio and use them as pull on the cpu rad, leaving me with the 2 ML fans for my gpu rad, how much of a differnce will they make on my gpu rad , i know LL fans are airflow fans and not that great for rads, and the ML fans can go up to 2000 rpm and are made for radiators , will they give me over all better temps than the LL fans ?
  10. Can you mix ML and LL fans on the same rgb hub ?
  11. one day i do intend to use this radiator with a 10700K or 10900K
  12. so no problem using the LL 140s at 1350RPM ?
×
×
  • Create New...