ProfRyan

Do you guys have a good reference that shows exactly how to plug the RGB cables from the ML140 fans into the cooler? A good diagram or install video?

Oh, also yes, the RGB LED hub is still plugged into the Button Controller for the case (that controls speed, effects, etc).

OK, still a bit confused but i think i am learning. So the SP120 fans are not compatible on the same RGB LED Fan Hub (that came with the Crystal Series 570X case. Its sounds like in order to be able to have RGB fan control for both my SP120 case fans and the ML140 fans that came with my H115i RGB Platnum Pro, i would need to purchase a commander pro and connect via the USB port. Is this correct? So for now, i can remove the RGB LED cables for the 2 ML140 fans from the RGB LED Fan Hub and just have the SP120 RGB pro fans plugged into ports 1, 2, and 3. Do i just leave the ML140 RGB LED cables unplugged for now? Will that impact their performance in anyway outside of no lights?

I bought the Corsair 570x case which comes with 3 SP120 RGB fans and a control node. I also bought the Corsair h115 RBG Platinum pro CPU cooler. Initially i wanted to mount the radiator on the top but found (my own fault for not checking ahead of time) that it will not fit in the top. So i moved the radiator to the front and relocated the 3 SP120 fans, 2 of them on the top and 1 as an exhaust fan in the back. I plugged the RGB cables from the 2 fans connected to my Radiator to nodes 1 and 2. I then plugged the RGB cable from the 2 SP120 fans on top to nodes 3 and 4. Finally i plugged the RGB cable from the back exhaust fan into node 5. I then plugged the 3 SP120 pwr cables into system fan 1, 2, and 3 on my Motherboard. The problem i have when i power on the system to test everything is i get RGB for the 2 fans connected to the radiator but nothing, no lights or anything from the 3 SP120 fans mounted on the top and the one on the back. I have double checked the connections to the RGB controller and they are snug. What am i missing?