Ben2000677

Yes, the USB was faulty. Try reseating it or replacing the cable

I'm actually not using spiral rainbow anymore and I am still experiencing the problem. I have just udpated to latest software of iCUE as well

Hi there Not sure if this is normal but if you look at the picture, my PSU seems to not show any readings. Any help will be appreciated! https://imgur.com/a/gpj2RCY

Just chiming in here as I was about to make a new thread about this. Can confirm the same issue and seems to fix itself if the lighting is changed from spiral rainbow

Still silence :(

am i allowed to bump?

it seems like this is the best way to have the three front ML fans configured as ML and the three HD fans configured as HD. Is there any downside to splitting the RGB if I do want the third ML fan to mimic the ML fans from the cooler? Is there an RGB splitter for Corsair fans? thanks for the help!

Hi there! Is there a way to have the RGB of a third ML120 fan synchronize with the other 2 fans from the H100i Platinum AIO CPU cooler? The Situation: I have a new setup in a Spec-Omega RGB case. I'm using an H100i Platinum cooler and have bought an addition HD120 fan and a ML120 fan. I am using iCUE to synch all the RGB The Plan: have three HD120 fans in the rear and top of the case on the same RGB channel have the two ML120 fans that come with the H100i cooler on the front of the case with a third additional fan below them all on the same channel The Problem: The case only comes with one hub and lightning node pro This means there is only one spare channel in iCUE for ALL the fans which aren't associated with a peripheral (the other channel is used by the spec omega's front LEDs) Having two types of fans on one channel means I have to set them ALL to HD120s in iCUE which makes the third ML120 look strange next to the two from the cooler. What's the most cost-efficient way to just get the front three fans to match each other? I don't really want to splurge on a commander pro. I was wondering if it was possible to get a splitter for the RGB channels of the H100i platinum fans and just slap the third ML120 into so it becomes part of the H100i RGB channel (almost like an H150i but with a shorter radiator). Or perhaps a hub can be used for them?