Xrat3d

Ryzen 5000 finally supported :D!

Any reason why the keyboard requires 2x USB 3.0? The pass-through port is USB 2.0, so why does it needs a 3.0 to be plugged in? Is there any issue if I connect the pass-through connector into a usb 2.0?

I'll appreciate any help plz :(

Hey there, Could you please elaborate more? When pressing the FN key, none of the other keys work, which I think that's the expected result. Do you want me to map anything to the FN key and then try again?

Hi Deny, did you get the correct firmware? if so, could you please share it with me? Im on the same situation

Hey guys, Does any one of you have a firmware file for the Scimitar RGB Pro ELITE mouse? I tried to update it and it failed and everything turned off an its not working. It shows up in my computer as "CRP DISABLD". Already tried the soft reset (left + right click then plug) but it doesnt work. I already opened a ticket but it's going to take forever for them to reply ... If anyonefrom Corsair sees this, could you please help me out? Here's my ticket number 2003839517 Thanks!

Hey team, Just upgraded from a K95 XT to the K100 and let me tell you, this keyboard yells premium. The design is just perfect and I love the little details like the "//K100" label on the left side of the keyboard and the "Corsair" label on the wrist rest. Talking about the wrist rest, the foam material is way better than the K95 XT and I just love that you guys used magnets this time. Keycaps are top level, I loved the font changes and can't tell why but it feels different than the older ones (in a good way). I already own a set of pudding keycaps but I'm really struggling on whether to keep the stock ones or swtich to the puddding. About the wheel, there's nothing much to say here, it's a good touch but I can't find a use case for it right now, Im sure I'll come up with something later on. I'm open to suggestions :) On to the switches... I used for several years MX Blue, and when I changed to the K95 XT (MX Silver) I struggled for about a week or 2 because they were very sensitive, so I kept pressing other keys when I was just resting my hand over the keyboard. After that period of adjustment, I no longer have any issues and I really love the linear feel of these switches. Now that I have the K100 (MX Silver) I can tell it's ALMOST the same as the K95. Only difference is that I feel the K100 switches to be more sturdy/premium and the sound they make is WAY better than the MX silvers of the K95. There's only 1 thing I didnt like, which are the media keys. They feel very cheap and they wobble a lot and the glossy style doesnt match at all to the style of the keyboard. The media keys from the K95 XT are top notch, so I would have preferred them to keep those. iCue Nexus - Something I was worried about was the support for the Nexus. I looked everywhere in the Corsair website and couldnt find a place where it says that the K100 supported the Nexus. I had to go to reddit and ask ppl around to find out if it was supported, which turned out to be :). So my suggestion is to update the product website to state that it supports the Nexus. I guess that the Nexus product site should be updated as well, as it says that it currenly supports only 3 models. As a side note, the bracket to mount the Nexus is not the same one as the K95 one, look for the other brackets in the box. Overall, this is a GREAT keyboard, you won't regret getting one.

Same issue here.

Hey guys, Any update on getting support for Ryzen 5000 series? Just installed a 5600x and iCue is not able to see the temperature.

I got the same behavior but found the problem... I have my Nexus plugged into the usb passthrough of my K95 XT, but the cable that goes into the PC, was plugged into a USB 2.0 port, as soon as I switched that to a USB 3.0, my CPU utilization came from 10% down to 5% ... hope this helps.

lol, it's quite simple, just go into the Commander Pro, then select Lighting Setup, hover over the fan that you want to rotate, and you'll notice a "rotation" symbol. Just click there to align it as you need.

Hey man, I just updated to 3.27.68 and now you can make the rotation.

Ryzen 3000 temps finally showing up in the dashboard and being able to set fan curve based on that!