Jump to content

skyteam78

Members
  • Posts

    90
  • Joined

Reputation

12 Good

Converted

  • Interests
    Aviation, Computers
  1. Ok. I solved it. So if anyone interested you can try this: I am using them with ASUS X670E-E, latest bios 1416 and 7950X3D CPU. Default EXPO I/ EXPO II settings didn't work and this caused boot and stability issues.So what you can try:1.Set Fast boot to disabled.2.Set Memory context restore to enabled.3.Set VDDSOC voltage to manual and set it for 1.27v for example. It is limited to 1.3 maximum so no worries. Vsoc voltage can impact dram oc stability.4.And the most important try to increase DRAM VDD and DRAM VDDQ voltages. These RAM modules use Samsung IC chip so it is safe to keep VDD voltages between 1.10 - 1.40V and VDDQ voltages between 1.10V- 1.50V. Corsair support agent confirmed they are safe!I set mine both to 1.40V but you can try slowly increase from default 1.35V.After that mine system is stable. Tested with AIDA64 and other different tests showed system is stable.
  2. Hi all, I recently upgraded my pc with ASUS X670E-E MB, 7950X3D CPU and Corsair Dominator DDR5 RAM (2X16GB) CMT32GX5M2D6000Z36. I specially got this RAM cause it was specified as AMD EXPO compatible. I am running lates bios 1416. Operating system is windows 11. I have am issues with using EXPO I/II profiles and running this RAM with 6000MHZ. The system just can't boot (unstable). Of course it is running perfect with non OC profile of 4800MHZ. I created ticket for support but still no answer. Can you suggest which setting to change in Expo profile to able to run RAM at 6000MHz or closer? Thanks
  3. skyteam78

    Greg's build

    Thanks a lot! 😃
  4. skyteam78

    Greg's build

    Upgraded my build with Corsair 7000x and EVGA 3090 FTW3 Ultra. CPU: 10900k Motherboard: Asus maximus Z490 Hero (Wifi) RAM: Corsair 2X16 GB DDR4-3600 PSU: EVGA Supernova 1200 P2
  5. The answer is yes. I am using it with my 10900K :)
  6. I agree. Clear fluids is a way to go. Opaque can look great but can be a huge headache later.
  7. I contacted Corsair, RMA opened and both fans sent to Corsair. They are still under warranty. Thanks for help
  8. I agree with Zotty. I am using mine for more than 1 year and now in second build. No issues ever. I can conclude that there should be no issues under regular and proper usage.
  9. I can recommend Thermaltake TT Gaming riser cable. https://www.amazon.com/dp/B06Y5YNGDJ/ref=pe_825000_114212990_TE_FOCE_n_id
  10. :laughing: i swear, it was Corsair rad when it was new :laughing:
  11. Yep. Very happy with it so far. Looks very stable and temps are good. :biggrin:
  12. Thanks :biggrin: I am running 4 cores on 5.3GHz, and 6 on 5.2 GHz, AVX 1, HT Off On stress test : 4 cores showing 5.2 GHz and other 6 - 5.1 GHz the temps are between 63-68 C https://imgur.com/SIjXeOB
  13. Hi all, Today I finished updating my previous build based on Corsair 500D SE case and Corsair Hydro X components. I must to say it runs great and I likes how it looks :biggrin: It runs Here are a few pictures: https://imgur.com/DTShK16 https://imgur.com/JNDR8ah https://imgur.com/NZFceD2 https://imgur.com/38wjC6j https://imgur.com/jJP1c33 https://imgur.com/vAcznJV
×
×
  • Create New...