Jump to content

digitalizeur

Members
  • Posts

    75
  • Joined

Reputation

10 Good

About digitalizeur

  • Birthday 09/15/1994

Converted

  • Interests
    PC Gaming

Converted

  • Occupation
    Refrigeration Installer for Supermarkets and Middle Size Stores
  1. Hello, It has finally worked, I had to bump 0,1 Volts to make it boot. It works now. From 1.353 to 1.36 something Shown 1.376 in DIP5 so it works now.
  2. Hello, I have decided to upgrade my CMW16GX4M2C3000C15 to some CMW16GX4M2K4000C19 and it doesn't want to work at full speed with the XMP, but, it works with XMP at 3900MHz. I have searched for some results where they ask to add more voltage to some of the controllers. But when I see how mine runs... Still, is there an overclocking that I can do somewhere to make it run at 4000? Because the advertisement for the motherboard shows that it can support up to 4000MHz. When I have checked the QVL, it wasn't in there, but my other 3000MHz kit wasn't there either and it ran. I have also contacted ASUS Support to add support for this ram in their future BIOS update, I hope it can be done. I'm not a programmer, not a developper. Otherwise, it's still false advertisement.
  3. This is what makes me think that it's worth it... [ame] [/ame] And thus... [ame] [/ame]
  4. Hello, I am here simply to complaint, I never succeed to make everything work together, all I could get was blincking white LEDs making me sweat of fear because I was thinking I broke the controllers or whatever... Dangerous thing. Corsair needs to do something, like controlling the Asus RGB LEDs.
  5. And I hope they will add the % of battery of the headset for the taskbar icon.
  6. Hello, I am playing on RUST and I would like to have more FPS. I have now the Corsair Vengeance Pro Rgb at 3000MHz C15 XMP with 8700K 5GHz 1.376-1.392 Volts. With a GTX1080Ti OC 2038MHz Asus ROG Strix. I am having on average 104 FPS, it goes below 80 FPS on areas with a lot of trees and grass. Sometimes, I can get 116 FPS on some areas without a high density of objects. I am playing the game with every settings crancked to the maximum except the deph of field blur. So I am wondering if I should spend some 440 Euros or 570 Euros on some ram to increase a slight bit of the performances. There is the Vengeance Pro Rgb series and the Dominator Platinum Rgb ones, I see that they're having both the same timings, what could justify that price? Theyre basically the same. On the site of Corsair, they're cheaper, I see.
  7. In my opinion, they should work with FPS Monitor developpers, to be able to see more things in the game you're playing accurately. I can already monitor the PSU. I want more stuff, I don't find my probes.
  8. Hello, I would like to suggest to create an option where we can add the percentage of the battery of our wireless headset in the Windows Task Bar. Thank you for listening.
  9. Hello, I would like to add that after I had installed Windows 10 1903, I had the fan curves issue like everyone else. But, I have forgot to tell you that my Corsair VOID Pro RGB Wireless doesn't work after installing iCUE or if I remember Windows 1903. I actually don't remember, but, it did not worked, so I had to connect it with USB and Force the FirmWare Upgrade. I guess it's after having installed iCUE, because I had to reinstall to test if all my fans curves could be saved after a fresh reinstall with registry cleaning. So, I guess it's iCue that if bugging the whole thing. This is still an issue to add to the list. Thank you for having read me.
  10. Well, at least, I'm not the only one suffering from this. Nah, I'm goog, I will wait the next version to be released and I will configure again, it takes not so much of time to do. But, do you think that there's a way of getting an older version of iCue like the nvidia drivers?
  11. Hello Corsair, Can you please, release the previous version of iCUE, like the nvidia geforce drivers, please? Thank you.
  12. It is not saving my fans curves for the commander pro, I command the fan speeds for the gtx 1080 ti's temperatures. The all in one cpu cooler, fan curves and the pump's speed sets to silence whereas I'm using it at the maximum since there's no way of regulating the pump's speed by temperrature, but could be resolved with a simple software adaptation, nevermind, Corsair. But the lighting still saves. Nah, I'm good, I'm gonna clean the registry, and, reinstall it somewhat. Indeed, gonna reinstall it I guess, clean everything with Asus DIP5 like CCleaner, clean the register. Gonna work again. Corsair: still a very good brand, good customer support, correct products, I'm still happy, but, this issue is weird, I think it's on my side on a brand new Windows 10 version 1903.
  13. If I reboot, everything disappears... Nice! Windows 10 1903.
  14. Hello, I had to change from french to english, reboot the program. Oh, interesting, I have found a new feature. I have also tested it, I set my cooling aio, commander pro's strips and fans. Rebooted my PC, and, it worked. Thank you.
×
×
  • Create New...