-
Posts
305 -
Joined
Reputation
15 GoodRecent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
-
Hey Snapegirl1974, Did you connect the cables to the ports coming off the motherboard or did you connect them directly to your GPU? The ports on the motherboard are disabled by default and won't give you any display. If you are connecting to the GPU can you check if the GPU is turning on when you boot up the system? Have you tried re-seating the GPU as well?
-
Corsair One A200 Expansion Guide?
Corsair Caliente replied to vett93's topic in CORSAIR Pre-Built Systems
As far as expansion goes you're able to swap/upgrade M.2 SSD, 2.5" HDD/SSD, and memory at your own discretion. We have a video on how to open up the system to gain access to your storage drive. You can also follow this to change out your RAM. Unfortunately we don't have a video for how to swap out your M.2 as they may sometimes be installed on the back of the motherboard. We do however have a written guide for that. If you do swap out or upgrade any of the above parts, we recommend holding on to them as they will be required if you ever need to send in your machine for RMA / Repair. You should also remove any new parts when sending your PC back to us to prevent any possibility of loss or damage. We heavily advise against swapping out the CPU, motherboard and/or GPU. Doing so would void your warranty. Hope this answers your questions! -
Just bought vengeance i7200, how to install firmware?
Corsair Caliente replied to nsaine's topic in CORSAIR Pre-Built Systems
Hey nsaine, Which SKU do you have? You can find this info on your box. -
Corsair One gaming PC vs Workstation Grade PC
Corsair Caliente replied to vett93's topic in CORSAIR Pre-Built Systems
Mainly CPU. The Workstation Grade systems are the only ones currently that come with the AMD RYZEN 9 5950X and or INTEL CORE I9-10940X. -
SSD brand/model used in Corsair One A200?
Corsair Caliente replied to vett93's topic in CORSAIR Pre-Built Systems
CPUs would be a lot harder to replace. Generally speaking, if a certain CPU is no longer available it would require a whole new SKU altogether. For components such as SSDs, PSUs, motherboards, GPU, etc. it's a lot easier to replace those components with alternative options and maintain the similar if not the same performance. We'd never deviate from what's listed on the Tech Specs as again, that'd require another SKU. I do see what you're saying and your concern is valid. If in the future we can secure components for our systems that stay static throughout that product's lifespan then we may be able to provide more information. -
Upgrading Corsair One i200 with DDR4 3600?
Corsair Caliente replied to Paganpilot's topic in CORSAIR Pre-Built Systems
I haven't done it personally. Be careful though as this configuration can potentially lead to thermal issues. It may be a struggle, too since there's no kit over 3200 listed on MSI's QVL. -
SSD brand/model used in Corsair One A200?
Corsair Caliente replied to vett93's topic in CORSAIR Pre-Built Systems
We're not at liberty to specify unfortunately. The main reason is that this component may be subject to change based on availability from our partners. Only thing we can guarantee is that it's a PCIe v4.0 M.2 SSD. -
Thanks for the reply. We'll try to recreate this issue and see if we can figure out the root cause of it. You said that the Extreme fan Profile is the only one that functions properly in iCUE. Is this still the case? Have you also tried installing the latest version of iCUE 3 instead of 4? If so, did it make any difference?
-
Corsair One Liquid Cooling
Corsair Caliente replied to iamanewby's topic in CORSAIR Pre-Built Systems Troubleshooting
Hey iamanewby, Sorry for keeping you waiting so long. I checked with support and it looks like they're trying to reserve you a replacement AIO. This look like it should be rolling along now. Once it ships out you'll get a tracking#.