Jump to content

Ingvarr100th

Members
  • Posts

    48
  • Joined

Reputation

10 Good
  1. I have a problem, it seems, with the power supply, where the computer randomly reboots. Most often at idle, very rarely during load. Most often the scenario looks like this: - I start the computer - doing something not very busy such as browsing or not doing anything at all - The computer suddenly reboots without bluescreen - the power supply shuts down, 3 seconds nothing happens and then the computer turns on by itself. The 5V bus for this still works because the motherboard does not go out completely (it looks like the computer is off) - The computer works again of 5-10 minutes and a repeat of the point above. And so it happens several times during the day within 1 hour and after some time it stabilizes. So it could be the PSU? I doubt it would be the MB because there would be a POST message on reboots, and there is none. My PC spec: PSU: AX860i MB: ASUS ROG Maximus XI Extreme CPU: i9 9900k stock clock with XMP GPU: ASUS ROG STRIX RTX 3080 Ti OC RAM: Corsair Vengeance RGB PRO 4x8GB 3600 CL18 Cooling: H115i PRO RGB 2xHDD + 2xSSD on SATA 2xSSD NVMe
  2. I followed these steps, reinstalled and it seemed to work initially. But I already had two crashes as I switched between sections on devices, for example on Virtuoso SE I switched to equalizer or wanted to open Lighting Node PRO settings. This hasn't happened before.
  3. After updating from 4.32.129, it crashes as soon as it starts up. The app is visible for maybe 10 seconds and then disappears. It's filed with errors like this: or this:
  4. Will an ASUS ROG Maximus XI Extreme fit into 5000T? It's an EATX and I'm afraid that the right edge with RGB backplate on this MB is going to collide with these rubber covers. Now I have 750D and I had to remove these covers.
  5. I'm mostly using Windows but sometimes Linux too. It would be nice use Corsair hardware with full support on Linux.
  6. I have 4x Vengeance RGB PRO and I have similar issues. I have red triangle afrer wake in iCUE.
  7. Yes, LEDs also emits heat and when in RGB LED module all of them are working at full power they can generate some noticeable heat.
  8. @Corsair James https://forum.corsair.com/v3/showpost.php?p=972639&postcount=2 It will be fixed? Void Visualizer is still buggy when ST100 is connected
  9. Well all what we need is firmware image which is hard to obtain driectly from Corsair. That's all. I can't believe it that upload of single file is taking so much time.
  10. I've contacted to support in case of bricked K95 by iCUE. I don't have response for 5 days! Are you guys working right there?
  11. I have the same problem but I'm waiting whole week for firmware from support to do hard reset.
  12. Actually this is Asus Ai Suite error.
  13. Wow I'm really surprised and happy about integration with Aura Sync! Problem is that now i cannot control lighting on Asus GPU because any changes on Armoury Crate cause override iCUE settings. For workaround I do changes in Armoury Crate then re-enable plugin support in iCUE (switch checkbox to off and on). Please keep up the good work with this integration!
  14. CPU interrupt requests mostly. When you are owner of RGB DRAM you loose more of CPU time due of frequent SMBus communication.
×
×
  • Create New...