Boki_

OK, one more thing, it's no way that I could possibly get Hypers if I buy new in a webstore, else the stock is old? Because those I can get are from webstore from my country and are new, so there's Elpida but no Hypers right? When were they produced with hyper's or Micron D9GTR/GTS, I'll try to get them by date of being produced, I think that's probably the only way where's most possible to get those right? regards, Bogdan

OK, so there's 100% it's elpida for rev 2.x and Micron for 3.x, but not necessarily Hypers or D9GTR/GTS? What if on my friend's are Elpida Hyper and I get same model and rev, just a little difference in serial numbers, mine would be produced a little later, friends has "Corsair Dominator GT DHX+ TC 6GB (3 x 2GB) 2000Mhz CL8 DDR3" CMG6GX3M3A2000C8 Ver. 2.1 ... s/n 10190571 and mine are "Corsair Dominator GT DHX+ TC 6GB (3 x 2GB) 2000Mhz CL8 DDR3" CMG6GX3M3A2000C8 Ver. 2.1 ... s/n 10369532? Any chance of getting same ICs? Here's the pic: http://freeweb.siol.net/bblokar3/domgt.jpg Sorry for I'm being annoying:o::o:

Great thnx. I also won a bid on ebay, the seller also sent me a pics of stickers and here are the numbers: CM3X2048-1600C9DHX under this is XMS3-1600 ... 2048MB ... 1600MHz on the sticker on the other side: 9-9-9-24 ... 1.80V ver 3.2 ... 08290067 So those are with Micron IC's? Maybe do you know D9GTR/GTS? Thank you, best regards, Bogdan

Are those chips using Elpida Hyper? CMG6GX3M3A2000C8 Ver. 2.1 They are on stock in one of webstores I buy, so I can't take the HS off and check for chips... It's 6GB kit, actually I'd need 4 or 8GB, because I've dual channel mobo ASUS Rampage Extreme + QX9770, so I'll just not use one of sticks. I've also noticed that some memory is ver 2.x and still not having elpida chips, how do I know for sure which are used? A friend of mine also took the HS off and have seen I think that PSC, while the memory was rev. 3.1 I think :SS What do I need to know 100%, part number + rev + any other number? Where can I get correct information, I need to buy new memory and have looking in few webstores, so all the information I have is part number, so I have to call and ask for revision or any other number beside revision? I need Micron D9GTR/GTS or Elpida Hyper and now I'm really confused of how to verify if there're really Elpida or Micron chips used :SS Sorry for my bad english. regards, Bogdan