HighOctane81

Sounds the same but switched around on LED ports. For me restarting ICUE doesn't seem to reset LED 1 LL120 but LED 2 and light node pro LED 1 and 2 all restart fine.

My LED strips are connected to a lighting node pro and work fine, but i do get freezing LL120 fans after a few minutes. These are connected to inbuilt 1000d commander pro. Although odd, other fans connected to same commander pro on LED option 2 work fine.

I think i'm narrowing my issue down. It seems to be ICUE and Lighting Option 1 on my 1000d through the inbuilt commander pro. I do use the pass through LED light cable on the 1000D. Currently my ligths on lighting option 1 via the commander pro don't restart when restarting the corsair service. All other lights do react to this restart. Currently i they seem to freeze with just one colour on the 4 LL120 that are connected to the commander pro option 1 lighting. I have option 2 lighting connected with 5 fans and all work with ARC and change on demand in ICUE. I think it's either the inbuilt commander pro or possibly the pass through cable on the 1000d. More likely the commander pro?

Hi, Since about 3 updates ago on icue my ll120 fans that are connected to my commander pro 1000d haven't worked right since. THe ll120 fans on the lighting node pro work fine with Arc. Can i rollback to a previous software version icue? Also, the latest update in icue now causes my icue to freeze / lock up until i end task.

This update locks up icue for me now. Still hasn't fixed 6 LL120 fans with ARC on commander pro. Static colours! Lighting Node Pro with other LL120 fans on arc work fine.

my LL120 fans off my 1000d commander pro still don't work properly. They are now fixed on Arc colour but no LED trail from Arc. If i restart corsair service all other fans restart apart from one line of 6 LL120 on the 1000d commander pro. The other 4 i have connected to 1000d commander pro restart ok. I have a lighting node pro with LL140 and LED strip all working fine with Arc. The last 2 updates have upset the lighting effect on my LL120 fans.

Since this version i still don't have my LL fans saving Arc profile on the inbuilt commander pro in the 1000d case. Also, when i setup the LL fans they freeze and no effect will work until i reboot and start all over. Light Pro node works fine which is connected to USB header also and has 3 LL fans. No problem with those but the commander pro since this update isn't playing nice!

I think it's broken my light sync. LL fans not saving now on my 1000d. Seems to have really screwed it up. Fresh reboot and only light node fans show not commander pro (1000D version). I go into icue and set them up and when i set the last 4 front fans they freeze. Latest software seems to have broken my LL fans / Commander Pro??

I am getting the same. Icue has been working for me on my 1000d with all fans and i think the new software update and broken iCue. No sync works and not saving LL fans. I put it down to latest iCue software being buggy??

Cheers Zotty. I thought I could and you seem to know your stuff so thought I'd ask first :) Awesome man cave by the way. You have a nice setup.

Hi, hope you don't mind me jumping in in your thread. Could I hook up to the i/o pass through with a rgb hub? Would save me buying another commander pro. So i/o to 1st rgb commander pro port as per factory. 1st rgb fan hub to 2nd commander pro port and then the 2nd rgb fan hub to the i/o pass through with the other set of 4 front fans. I'd then have all front fans and I/o working from the 1000D commander pro. Does thag make sense?