mcseman23

Here's a fun one. It sounds like one of my fams is revving like a race car. I have 11 QL fans in my system (3 x 140 and 8 x 120). Every time I boot up my machine, it seems like one of them is making a ton of noise. I can't isolate at the moment, but it is rather annoying. Is there a way in the ICue software to isolate which fan is having the issue without having to move & open up my case? Thanks. Oh, just so you know. here are my fan speeds: on my H150i - all 3 fans are running between 850 and 875 RPM 3 fans attached to my commander pro that came with my case (all 120s) - around 1500 rpm each 5 fans on secondary commander pro (2 x 120 and 3 x 140) 3 around 1400 rpm and 2 around 1500 rpm. I suspect the 120s are running at 1500, but cannot confirm.

I'm experiencing the same issues, but with a lighting node core. Daisy chained 2 commander pros, and one lighting node core in each commander pro. 5 fans working fine, other 6 when I hear the USB disconnect turn white. The node core in question also drops out of iCUE. Restarting the computer fixes the issue, but it is annoying as all get out. Any ideas??

After waiting for quite I while, I've been able to complete my new system build using this case.lp I have a dumb question. The screw that comes with the glass door. Where does it go? I can't seem to figure that out. Any help would be appreciated.

I'm a little puzzled. I've built a number of systems for myself and others, but this one has me scratching my head. Here's what I am working on: Building a new system for myself (specs are in my profile). I am at a loss as to what series of fans to use. I'm torn between QL and ML RBGs. I have already swapped the trays so that the 8 x 120 MM is up top, What I want to do: 3 x 140mm in the front on intake 8 x 120mm up top on exhaust (3 of which will be on a H150i radiator) 1 x 120mm out the back for exhaust The other 120mm spot in the back will be taken up by the video card's AIO cooler. I'm thinking I will need a 2nd commander pro daisy chained into the one that already comes with the case (of which 9 of the fans will be powered- the other 3 will use the AIO), and two lighting hubs to control the 12 fans. Is this a reasonable setup, and which fan series would be a better fit? Thanks