Jump to content

keasy

Members
  • Posts

    27
  • Joined

Reputation

10 Good
  1. Wasn't sure to mention the fans and RAM as they're competitor makes. It's x1 Noctua NF-F12 exhaust x1 Noctua NF-A15 CPU fan x3 Noctua NF-A12x25 Front intake x2 8GB (16GB) Trident Z RGB RAM on default colour cycle Only other RGB is at the front of the case a Corsair Spec06 RGB
  2. My PSU fan won't stop running, it doesn't enter zero noise mode. There's not much drawing on it when in desktop and everything else is idle. It's really annoying. Any ideas? X470 chipset 2700x CPU Nvidia 3070 GPU 16GB 3000 DDR4 x2 SSD Sata X1 SSD nvme2 X3 front intake fans 120mm X1 exhaust 120mm X1 CPU heatsink fan 140mm
  3. Just an update, in case anyone is interested. Got a response from support and they are sending me a new trim. I'm assuming that's the front bezel? Seems pretty decent if it is (or if it isn't, i'll need to work it out) that I don't need to totally RMA the whole case.
  4. Recently built a new rig with this case. At first everything was fine. Now when I turn the power on at the wall socket the PC fires up and then shuts down by itself without having pressed the front panel IO. Taking both side panels off and then replacing them seemed to work for a day. Now the same thing happens then once it's shut down if I press the power switch really hard it boots up. Also when I place USB stick in the front USB slot and pull it out the PC shuts down. I think it's linked to this power button, there seems to be some sort of design flaw as I'm noticing a few threads similar to this. Any help Corsair?
×
×
  • Create New...