Zoltane

Is the video card from a 2018 One Pro Ti usable in another configuration? A custom cooling solution is necessary obviously but can it be fitted in another motherboard in another case?

How long is the video card in the 2018 One Pro Ti?

chances are both ssds are fine and the mobo is broken. is there a way to get a replacement? as far as i know its a custom one.

so the 970 is in but no sign of it in the bios. is it possible that it is not compatible?

Unfortunately i need the machine in working condition asap before i lose my clients and thus my income. Can you give me any advice regarding the disassembly and m.2 replacement? I ordered a samsung 970 1Tb. When i get it i will try to start the pc again, hopefully it will run long enough to clone the boot drive to the 970 attached via an usb dongle. (Btw both the corsair diagnostic and the windows checkdisk found no errors on c: ) Then a guy i hired will disassemble the One and install the 970. Hopefully it will work afterwards... (If i keep getting bsods the same way then it's probably mobo and i'm truly screwed...) So yeah, that's the plan at least, we'll see how it goes.

I have the following config from 2018: Corsair ONE PRO Ti Intel Core i7-7700K DDR4 16GB SSD M.2 480GB HDD 2TB Nvidia GeForce GTX 1080 Ti For the past few weeks I have been getting random BSODs, sometimes booting into UEFI and not windows. This morning the m.2 drive disappeared completely from UEFI. I opened up the PC and adjusted cables and whatnot, nothing was obviously loose or anything. After plugging back everything I can boot into windows again but as soon as I have more than a web browser running I get a BSOD in 5-10 minutes. I ran window's RAM check and it found no issues so it seems that indeed the m.2 boot drive is failing. What should I do now? EDIT: Would a 970 PRO 512GB MZ-V7P512 be a proper replacement? Size, temperature tolerance, etc...

Nevermind, one stick wasnt pushed in well enough.

I upgraded the ram (see https://forum.corsair.com/v3/showthread.php?t=193819 for specs) but now it doesn't boot. no beeps no picture I can hear pump running, thats all. any advices?

How about this one? https://www.corsair.com/us/en/Categories/Products/Memory/VENGEANCE-LPX/p/CMK32GX4M2A2666C16#tab-tech-specs The voltage is 1.2v but the latency values are different.

Great info thank you!

Z270I (MS-7A66) CPU: i7-7700K @ 4.20Ghz

Hi, Since the VENGEANCE® LPX 32GB (2 x 16GB) DDR4 2400MHz (PC4-19200) C16 Memory Upgrade Kit is out of stock I was looking around for an alternative and found these: Corsair VENGEANCE LPX 32GB (2x16GB) DDR4 3000MHz CMK32GX4M2D3000C16 Could I replace the 2x8Gb to those?

If my K95 RGB keyboard is plugged in when the PC comes back from sleep then the xbox360 controller stops working. The "Set up USB game controllers" panel takes couple of minutes to open and even then it's frozen. On fresh boot or when the keyboard is not plugged in, no problems. I'm on Windows 10, version 180, Corsair One (1080 Ti).

Is there a way (official or not) to control the lighting per key on a blue wireless K63? CUE doesn't seem to work the way it does with my K95. Aurora, while can display the name, does not allow to select it as a keyboard to adjust.