Search the Community
Showing results for tags '1fan'.
-
Having searched an read much of what has gone before I think this warrants a new thread due to the setup: Issue: I can only get RGB lighting from Fan 1 (of 3) when connected to the RGB hub. I have tried all 3 fans in port 1 and they all get RGB in that pot but only that fan. ALL FANS SPIN UP. I have connected the following: 3 HD120 fans into the RGB hub with 3 pin cables and 4 pin cables on the CoPro RGB hub into LED 2 on CoPro CoPro detected in iCue and I setup 3 HD120s on Lighting Channel 2 with raindow effect CoPro did a firmware update too so i completed this before setting up the fans in iCue. Both RGB Hub and CoPro are on their own single sata cable from the brand new corsair 750w PSU Testing: All fans spin All fans RGB work in port 1 on the RGB hub (no RGB from other fans I have re ordered the fans on the RGB hub connecting in ports 1 2 3 but only port 1 will work for RGB. Prior to the CoPro introduction, fans all worked correctly using the RGB hub and the HD lighting controller. iCue up to date CoPro Firmware up to date What have I done wrong? All fans work (if in port 1 on the RGB hub) so it must be a connection or software issue. I note that in icue all 3 fans display but only one is achieving 12v the rest are much lower.