Rayne91 Posted November 28, 2013 Share Posted November 28, 2013 I bought a set of used water cooling parts of ebay and because they were pretty cheap i decided to buy it and try and make it work but it seems like it's going to be harder than I thought, so I need some ideas on how i can mod my corsair air 540 to fit 2 360 (3x120) radiators, I know i could justy try using 1 of them and it may be enough but since they all came together i want to try and use them, they'll be used to cool a gtx 670 and fx 8320 both of which I will eventually overclock, I have: EK-CoolStream RAD XT 360 398x123x47mm XSPC RX360 Black High Performance Radiator (125x58.5x410mm) XSPC Black Single 5.25" Bay Reservoir Swiftech MCP655 Pump with EK-D5 X-TOP REV.2 those are the other parts just to give you an idea of what needs to fit in. any help would be appreciated. :biggrin: Link to comment Share on other sites More sharing options...
wytnyt Posted November 29, 2013 Share Posted November 29, 2013 your gonna need to mod for things to work,,you need to cut and make rad mounts and such... Link to comment Share on other sites More sharing options...
oOSlushyOo Posted December 3, 2013 Share Posted December 3, 2013 Seems to me you should be able to run one on the intake in the front and one on the top portion of the case with just a little bit of modification (maybe none). Got any pictures to get an idea of what might be causing you problems?? Link to comment Share on other sites More sharing options...
wytnyt Posted December 3, 2013 Share Posted December 3, 2013 check this thread,good modding ideas http://forum.corsair.com/v3/showthread.php?t=121577 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.