The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Systems > CORSAIR ONE

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 10-28-2017, 06:35 PM
zguy85 zguy85 is offline
Registered User
 
Join Date: Apr 2017
Posts: 114
POST ID # = 924794
zguy85 Reputation: 10
Default 4.7 Ghz OC Stable Settings

Playing around with Intel XTU I have achieved a very stable and decent gain in performance on the Corsair One with very minimal heat increase.

I have previously performed a 7700K De-Lid which can also be found in the MOD section and is highly recommended.

Now running at 4.7 GHz. Here are the settings I recommend changing and let me know what you think.

Reference clock - 100.0 MHz to 102.2 MHz
Core Voltage + Cache V - Default to 1.170V
Processor Core Ratio - 45x to 46x


Went from Scoring a 1235 with max temp 77C to 1280 temped at 79C at room temp of 24C using Intel XTU Utility.

Last edited by zguy85; 11-05-2017 at 12:40 AM.
Reply With Quote


  #2  
Old 10-28-2017, 06:58 PM
zguy85 zguy85 is offline
Registered User
 
Join Date: Apr 2017
Posts: 114
POST ID # = 924796
zguy85 Reputation: 10
Default

***UPDATE*** Previous listing for 4.8GHz proved not to be stable and finally shot me while playing Destiny 2. After further testing, this is what I have found to be the best so far on the Corsair One with same performance and lower temps than previously. #Winning

--Here's an even better 4.8 GHz stable setting.--

Reference clock - from 100.0 MHz to 102.1 MHz
Core Voltage + Cache V - from Default to 1.170V
Processor 1-4 Cores - from 45x to 47x

Temped at 73C

Last edited by zguy85; 11-05-2017 at 12:50 AM.
Reply With Quote


  #3  
Old 10-29-2017, 02:14 AM
RC_ONE RC_ONE is offline
Registered User
RC_ONE's PC Specs
 
Join Date: Oct 2017
Posts: 120
POST ID # = 924812
RC_ONE Reputation: 10
Default

Hey zguy85,

What max core temps and scores do you get running just 3Dmark TimeSpy?

I realize peak temps (as long long as they're not excessively breaking the 90c's) aren't a serious concern, and sustained temps are the real test, but I'm looking at some other (very loose) comparative spike testing, which 3DMark does well enough for now.

Last edited by RC_ONE; 10-29-2017 at 02:18 AM.
Reply With Quote


  #4  
Old 10-29-2017, 03:55 PM
zguy85 zguy85 is offline
Registered User
 
Join Date: Apr 2017
Posts: 114
POST ID # = 924850
zguy85 Reputation: 10
Default

I currently don't use 3D Mark, but if you have a free way to bench let me know I'll run it. I'm cheap at the moment to dish the $30.

I use Intel's XTU Utility for Processor benching and stress testing, uses similar to Prime 95 which I use to perform real stress tests of 6HR or more. Intel XTU is free and pretty sure it is doing spike testing and provides a score with temp with it's benchmark mode along with plenty of OC options from Intel fo FREE.

I also use Unigine's Superposition benchmark for GPU if interested I can upload you a photo of my results, it is also FREE but did pay for upgrade on that one =).

Last edited by zguy85; 10-29-2017 at 04:04 PM.
Reply With Quote


  #5  
Old 10-30-2017, 01:42 AM
RC_ONE RC_ONE is offline
Registered User
RC_ONE's PC Specs
 
Join Date: Oct 2017
Posts: 120
POST ID # = 924879
RC_ONE Reputation: 10
Default

Quote:
Originally Posted by zguy85 View Post
I currently don't use 3D Mark, but if you have a free way to bench let me know I'll run it. I'm cheap at the moment to dish the $30.

I use Intel's XTU Utility for Processor benching and stress testing, uses similar to Prime 95 which I use to perform real stress tests of 6HR or more. Intel XTU is free and pretty sure it is doing spike testing and provides a score with temp with it's benchmark mode along with plenty of OC options from Intel fo FREE.

I also use Unigine's Superposition benchmark for GPU if interested I can upload you a photo of my results, it is also FREE but did pay for upgrade on that one =).
The 3Dmark TimeSpy test is free as part of the "Basic Edition" you can get here https://www.futuremark.com/support/downloads

And I'd be interested in whatever benchmark results you're up for sharing. I may be exploring various benchmarking tools as part of a different project, but I'll likely run them on my C1 as well :)
Reply With Quote


  #6  
Old 11-05-2017, 12:45 AM
zguy85 zguy85 is offline
Registered User
 
Join Date: Apr 2017
Posts: 114
POST ID # = 925449
zguy85 Reputation: 10
Default

Bumped for ***Update*** above.

Last edited by zguy85; 11-05-2017 at 12:48 AM.
Reply With Quote


Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:20 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.