Bluerazer Posted January 17, 2013 Share Posted January 17, 2013 Hi everyone, Just a little question. I've some spare mirage OMNISAT satellites which I want to connect to the SP2500 for slightly better SQ, any hints how to go around doing that? I was thinking making my own cable, 1 end with ATX4 connection but I got stuck at the other end, as I would need to terminate 4 wires. Anyone who can help me out on this would be really, really appreciated! Thank you in advance! :) Link to comment Share on other sites More sharing options...
CMOwen Posted January 18, 2013 Share Posted January 18, 2013 I think you'll run into problems. Those 4 wire cables are necessary for the SP2500's since each satellite receive a signal from 2 different amps. The signal is also crossed over, one for the tweeter, one for the midrange driver. If you run a single set to other speakers you won't get the full range - you'll get either the midrange or high frequencies. If you run them together, you will create a short, increase the load on the two mid/high amps, and damage both the sub/amps and your other satellites. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.