X8 LL120 ICUE Setup Help - Sequential order help!

Hi Guys,

I have just set up my build but wanted to ask if anyone knew about setting up x8 LL120 fans to sync together with Corsair ICUE software.

My Setup 8 Fan Total + 4 Corsair RGB Light Strips:

X3 Front LL120s

x2 Top LL120s (Hydro H100i Platinum SE cooler)

x1 Rear LL120

x2 Bottom LL120s

x1 Commander Pro

x1 RGB Hub

-I currently have the front 3, rear fan, and bottom 2 fans set up in sequential order plugged into the 6 port hub. The hub is plugged into channel 1 of the commander pro.

-I Then have the 4 RGB strips connected directly into Channel 2 of the RGB Hub.

-The 3Pin fan connecter which comes off the pump head is connected to the CPU_FAN header, SATA to the power supply on the Motherboard. The HX2 top H100i (LL120) Fans plugged into the two connectors that come off the pump head and the RGB Connectors are connected to the numbered connectors.

(basically like this -https://www.youtube.com/watch?v=FTg2kW3ObCs)

MY ISSUE:

I can't seem to get all the 8 fans set up to use a sequential RGB lighting order together.

In ICUE, I can use certain lighting effects using the Lighting Link effects which WILL connect all the fans and CPU pump RGB lighting together with the RAM BUT if I try to use the Sequential lighting effect, I can only seem to do it for the 6 fans plugged into the Commander Pro.

The sequential lighting effect does not seem to work across all 8 fans.

MY QUESTION: Can you set up all x8 fans be setup in ICUE to use a sequential lighting effect? If yes, how can you do this? If no, could someone explain why (i think I know why) but can my setup be re-arranged if I use another hub or an LNP added to the setup to get all the fans connected in a way that the sequential lighting effects work across all fans?

It would be great if someone more experienced could advise?